Volume VI Issue I

An Experimental Study on Internal Curing of Concrete Using Light Expanded Clay Aggregate

Zaheer Ahmed, Akshatha B A, Dr. Mushtaq Ahmed Bhavikatti, Harshith H J – January 2019 Page No.: 01-05

as water is becoming a scarce material day-by-day, there is an urgent need to do research work pertaining to saving of water in making concrete and in constructions. Curing of concrete is maintaining satisfactory moisture content in concrete during its early stages in order to develop the desired properties. Keeping importance to this, an attempt has been made to develop self-curing concrete by using Light Expanded Clay Aggregate (LECA). In this experimental investigation the strength characteristics of Normal Strength Concrete cast with the self-curing agent LECA have been studied and compared with the corresponding conventionally cured concrete. IS method of mix design was adopted, for the normal strength internal curing concrete of grade M30 grade of concrete is design on trial and error basis. For producing internal-curing concrete replacements of 5%, 10%, 15% and 20% of LECA by weight of aggregate was used and tested. It was observed that after implementation of new technique the water consumption for curing was significantly reduced by 100% for 5% and 10% replacements.

Page(s): 01-05                                                                                                                   Date of Publication: 13 January 2019

 Zaheer Ahmed
Department of Civil Engineering, Bearys Institute of Technology, Mangalore, India

 Akshatha B A
Department of Civil Engineering, Bearys Institute of Technology, Mangalore, India

 Dr. Mushtaq Ahmed Bhavikatti
Department of Civil Engineering, Anjuman Institute of Technology and Management, Bhatkal, India

 Harshith H J
Department of Civil Engineering, Bearys Institute of Technology, Mangalore, India

[1]. Dayalan J,Beullah M (2014) “Internal curing of concrete Using Pre-wetted Light Weight Aggregate”.
[2]. Sarvagya Tripati (2015) “Comparative Study Between Externally Cured Concrete And Internally Cured Concrete”.
[3]. Khokrin, N. K. (1973) “The Durability Of Lightweight Concrete Structural Members.” Kuibyshev, USSR (in Russia).
[4]. Hoff. G.C. (2006) “Internal Curing Of Concrete Using Lightweight Aggregates”. American Concrete Institute, Volume 234, March 2006, P621-640.
[5]. Amon Bentura , Shin-Ichilgarashib , Konstantin Kovlera, “Prevention Of Autogenous Shrinkage In High-Strength Concrete By Internal Curing Using Wet Lightweight Aggregates”, Cement And Concrete Research , Volume 31 , Issue 11 , November 2001 , Pages 1587-91.
[6]. Villareal , V.H. and Crocker , D.A., “Development Of Internally Cured Concrete For Increased Service Life” Publication FHWA/IN/JTRP-2010/10. Joint Transportation Research Program, Indiana Department Of Transportation And Prudue University , West Lafayette , Indiana , 2010.
[7]. Roberts, J., “High Performance Concrete: Enhancement Through Internal Curing”, Concrete Infocus , Vol. Winter 2006 , pp.55-59 , (2006).
[8]. Henkensiefken, R., “Internal Curing In Cementitious Systems Made Using Saturated Lightweight Aggregate “ , Prudue University , 2008.
[9]. Bentz , D.P., “Influence Of Internal Curing Using Lightweight Aggregates On Interfacial Transition Zone Percolation And Chlorides Ingress In Mortars “, Cement And Concrete Composites , Vol.accepted , pp.(2008).
[10]. Bentz , D.P., Lura , P., and Roberts , J., Mixture Of Proportioning For Internal Curing , Concrete International , Vol.27, pp.35-40 (2005).

Zaheer Ahmed, Akshatha B A, Dr. Mushtaq Ahmed Bhavikatti, Harshith H J “An Experimental Study on Internal Curing of Concrete Using Light Expanded Clay Aggregate” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.01-05 January 2019  URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/01-05.pdf

Download PDF

pdf

Real Time Power Consumption Monitoring Using Arduino
Chalita Sookasame, Wu Zhongdong – January 2019 – Page No.: 06-12

Due to the economic growth, the demand for electricity tends to increase every year and that can lead to global warming and climate change. The resources in the world are limited while the society has unlimited demands, so energy conservation, including effective energy consumption should be of great concern, and people should concentrate on it. Real Time Power Consumption Monitoring Using Arduino is using an Arduino platform as a microcontrollerto read the voltage and current from sensors and then wirelessly send the measured data to monitorthe results using a new Android application. An Android application used for monitoring the energy usage of small electrical devices. The users can visualize, control, and make plans for the energy consumption in each device or group of devices via the Internet. For the design, the Database System that consists of OLTP (Online Transaction Processing) for operational data transactions and OLAP (Online Analytical Processing) are used for historical data supports flexible and adaptable data and historical-data-repository reports.

Page(s): 06-12                                                                                                                   Date of Publication: 18 January 2019

 Chalita Sookasame
School of Electronic and Computer Engineering, Lanzhou Jiaotong University, China

 Wu Zhongdong
School of Electronic and Computer Engineering, Lanzhou Jiaotong University, China

[1]. E. Fiorucci. 2015. “The measurement of actualapparent power and actual reactive power from theinstantaneous power signals in single-phase and three phase systems,” Electric Power Systems Research, Vol. 121, pp. 227-242, 4//.
[2]. S. Ziegler, R. C. Woodward, H. H.-C. Iu and L. J.Borle. 2009. “Current Sensing Techniques: AReview,” IEEE Sensors Journal, Vol. 9, No 4, pp. 354- 376, April.
[3]. LEM. Current Transducer LTS 15-NP [Online].Available:http://www.farnell.com/datasheets/51625.pdf
[4]. Rajeev Piyare, “Internet of Things: Ubiquitous Home Control and Monitoring System using Android based Smart Phone”, International Journal of Internet of Things, 2(1): 5-11, 2013.
[5]. Sachin Kishor Khadke,” Home Appliances Control System Based On Android Smartphone”, IOSR Journal of Electronics and Communication Engineering,9(3):5-6,2014.
[6]. Mohamed Abd El-Latif Mowad,” Smart Home Automated Control System Using Android Application and Microcontroller”, International Journal of Scientific & Engineering Research,5(5):5,2013.
[7]. Chun-sen XU, Xiang-jian CHEN, Di LI, Xiu-hongZhong, “Automatic Electric Meter Reading System Based onZigBee”, 2008, IEEE, pp: 1-4.
[8]. Ashna.k, Sudhish N George, “GSM Based Automatic Energy Meter Reading System with Instant Billing”, 2013,IEEE, pp: 65-72.
[9]. Wasana Boonsong and Widad Ismail, “Wireless Monitoring of Household Electrical Power Meter Using Embedded RFID with Wireless Sensor Network Platform”, Hindawi Publishing Corporation International Journal ofDistributed Sensor Networks Volume 2014, Article ID 876914, 10 pages.
[10]. Wibhada Naruephiphat, Chalermpol Charnsripinyo, Sadit Satienpaisarn, Ridnarong PromYa, “Applying Wireless Sensor Network for Power Consumption Monitoring”, 2012, IEEE, pp: 1-4.
[11]. Md. Kamal Hossain, Md. Mortuza Ali, Md. Rafiqul Islam Sheikh, “Microcontroller Based Single PhaseDigital Prepaid Energy Meter for Improved Metering and Billing System”.
[12]. Alsibai, M.H.; Siang, H.M. A smart driver monitoring system using android application and embedded system. In Proceedings of the 5th IEEE International Conference on Control Systems, Computing andEngineering (ICCSCE 2015), Penang, Malaysia, 27–29 November 2015; pp. 242–247.
[13]. Aurilio, G.; Gallo, D.; Landi, C.; Luiso, M.; Cigolotti, V.; Graditi, G. Low cost combined voltage andcurrent transducer for Smart Meters. In Proceedings of the 2014 IEEE International Instrumentation andMeasurement Technology Conference, Montevideo, Uruguay, 12–15 May 2014; pp. 1459–1464.
[14]. Gill, S.P.S. Smart Power Monitoring Utility System Using Wireless Sensor Networks. In Proceedings of the 2012 Sixth International Conference on Sensing Technology, Kolkata, India, 18–21 December 2012; pp. 5–114.
[15]. Rahman, M.; Alfaki, A.; Shafiullah, G.M.; Shoeb, A.; Jamal, T. Demand Response Opportunities in Residential Sector Incorporated with Smart Load Monitoring System. In Proceedings of the 2016 IEEE Innovative SmartGrid Technologies-Asia, Melbourne, Australia, 28 November–1 December 2016.
[16]. Calderón, A.J.; González, I.; Calderón, M.; Segura, F.; Andújar, J.M. A new, scalable and low costmulti-channel monitoring system for polymer electrolyte fuel cells. Sensors 2016, 16, 1–19.
[17]. De Santis, D.; Giampetruzzi, D.A.; Abbatantuono, G.; La, M.; Fellow, S.; Bari, P. Smart Metering for LowVoltage Electrical Distribution System using Arduino Due. In Proceedings of the 2016 IEEEWorkshop onEnvironmental, Energy, and Structural Monitoring Systems, Trento, Italy, 13–14 June 2016; pp. 1–6.
[18]. Tamkittikhun, N.; Tantidham, T.; Intakot, P. AC power meter design based on Arduino: Multichannel single-phase approach. In Proceedings of the 19th International Computer Science and Engineering Conference (ICSEC): Hybrid Cloud Computing: A New Approach for Big Data Era, Chiang Mai, Thailand,23–26 November 2015.
[19]. David, N.; Anozie, F.N.; Ebuka, F.O.; Nzenweaku, S.A. Design of an Arduino Based Wireless. Int. J. Sci.Eng. Res. 2016, 7, 466–469.

Chalita Sookasame, Wu Zhongdong “Real Time Power Consumption Monitoring Using Arduino ” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.06-12 January 2019 URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/06-12.pdf

Download PDF

pdf

Convolutional Neural Networks (CNNs) for Image Recognition and Detection
Aparna Mohan – January 2019 – Page No.: 13-14

Nowadays, face recognition is widely uses in many security based applications. Even mobile phones and other such gadgets consider face as one of the most secure biometric application. Deep learning based models are used for face recognition. Deep features are obtained by using several convolutional and pooling layers to extract features from input images.

Page(s): 13-14                                                                                                                   Date of Publication: 20 January 2019

 Aparna Mohan
Department of Computer Science and Engineering, Jawaharlal College of Engineering and Technology, Mangalam, Lakkidi, Ottappalam, Palakkad, Kerala, India

[1]. Karen Simonyan and Andrew Zisserman (2015). Very deep convolutional networks for large-scale image recognition: Visual Geometry Group, Department of Engineering Science, University of Oxford.
[2]. Timo Ahonen, Abdenour Hadid, and Matti Pietikainen (2004). Face Recognition with Local Binary Patterns: Machine Vision Group, Infotech Oulu.
[3]. Snehal Humne and Prachi Sorte (2018). A Review on Face Recognition using Local Binary Pattern Algorithm: M.E. Dept. of I.T., R.M.D. School of Engineering, Savitribai Phule Pune University, Pune, Maharashtra, India Asst. Professor, Dept. of I.T., R.M.D. School of Engineering, Savitribai Phule Pune University, Pune, Maharashtra,India.
[4]. Rui Shao, Xiangyuan Lan, Pong C. Yuen (2017). Deep Convolutional Dynamic Texture Learning with Adaptive Channel-discriminability for 3D Mask Face Anti-spoofing: Department of Computer Science, Hong Kong Baptist University.
[5]. Abhilasha A Patil, Lakshmi Maka, Abhilasha A Patil and Lakshmi Maka (2015). User Recognition Based on Face using Local Binary Pattern (LBP) with Artificial Neural Network (ANN) : International Journal of Ethics in Engineering & Management Education.

Aparna Mohan “Convolutional Neural Networks (CNNs) for Image Recognition and Detection ” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp. 13-14 January 2019 URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/13-14.pdf

Download PDF

pdf

Variability of Malnutrition by Gender among Under Five Children in Bangladesh: Illustration Using Bangladesh Demographic and Health Survey, 2011 and 2014 Data

Sukanta Das, Habiba Akter, Abdul Muyeed – January 2019 Page No.: 15-18

Bangladesh has shown a lot of progress in reducing child malnutrition in the last few years. Despite this progress, control of the variability of child nourishment with gender is still a challenge. But, gender-based nourishment equality is most important to continue the sustainable development progress of child nutrition in Bangladesh. This study unveils the underlying variability of child nourishment with gender. The relevant child data for this study were extracted from the two rounds of Bangladesh Demographic and Health Surveys (BDHS) conducted in 2011 and 2014. To examine the extract of nutrition, we used the measurement of height-for-age, weight-for-age, and weight-for-height. The main findings of this paper were, the male child had less stunting prevalence than the female in 2011 but higher in 2014. The male child had less underweight prevalence than the female in both years, whereas the male child had greater wasting prevalence than the female in both years. To reduce the variability of child nourishment, itmust need to arrange split program and ensure equal food habit for each category of gender.

Page(s): 15-18                                                                                                                   Date of Publication: 20 January 2019

 Sukanta Das
Lecturer, Department of Statistics, Begum Rokeya University, Rangpur, Bangladesh

 Habiba Akter
Research Student, Department of Statistics, Begum Rokeya University, Rangpur, Bangladesh

 Abdul Muyeed
Lecturer, Department of Statistics,Islamic University, Bangladesh

[1]. World Health Organization. Malutrition. [16 February 2018]. URL: www.who.int/en/news-room/fact-sheets/detail/malnutrition
[2]. Liu, L., Johnson, H. L., Cousens, S., Perin, J., Scott, S., Lawn, J. E., &Mathers, C. (2012). Child Health Epidemiology Reference Group of WHO and UNICEF Global, regional, and national causes of child mortality: an updated systematic analysis for 2010 with time trends since 2000. Lancet, 379(9832), 2151-2161.
[3]. Black, R. E., Allen, L. H., Bhutta, Z. A., Caulfield, L. E., De Onis, M., Ezzati, M., … & Maternal and Child Undernutrition Study Group. (2008). Maternal and child undernutrition: global and regional exposures and health consequences. The lancet, 371(9608), 243-260.
[4]. Gulati, J.K., 2010. Child malnutrition: trends and issues. The Anthropologist, 12(2), pp.131-140.
[5]. Bank, U. W. T. W. (2012). Levels and trends in child malnutrition: UNICEF-WHO-the world bank joint child malnutrition estimates. Washington DC
[6]. Deolalikar, A.B., 2005. Poverty and child malnutrition in Bangladesh.Journal of Developing Societies, 21(1-2), pp.55-90.
[7]. Islam, A., & Biswas, T. (2015). Chronic stunting among under-5 children in Bangladesh: A situation analysis. AdvPediatr Res, 2, 18.
[8]. Hasan, M.T., Magalhaes, R.J.S., Williams, G.M. and Mamun, A.A., 2015. Forecasting the progress towards the target of Millennium Development Goal 1C in children under 5 years of age in Bangladesh. Public health nutrition, 18(10), pp.1728-1736.
[9]. Bagmar, M.S.H. and Khudri, M.M., 2015. Tracking Changes and Identifying Determinants of Child Malnutrition Status over the Past Decade in Bangladesh. Pakistan Journal of Nutrition,14(12), p.964.
[10]. National Institute of Population Research, Training (Bangladesh), Mitra and Associates (Firm) and Macro International, 2009. Bangladesh Demographic and Health Survey, 2007.NIPORT.
[11]. Meshram, I. I., Arlappa, N., Balakrishna, N., Rao, K. M., Laxmaiah, A., & Brahmam, G. N. V. (2012). Trends in the prevalence of undernutrition, nutrient & food intake and predictors of undernutrition among under five year tribal children in India.Asia Pacific journal of clinical nutrition, 21(4), 568-576.
[12]. Demissie, S., &Worku, A. (2013). Magnitude and factors associated with malnutrition in children 6-59 months of age in pastoral community of Dollo Ado district, Somali region, Ethiopia. Sci J Public Health, 1(4), 175-83.
[13]. Zhang, J., Shi, J. X., Himes, J. H., Du, Y. K., Yang, S. B., Shi, S. H., & Zhang, J. D. (2011). Undernutrition status of children under 5 years in Chinese rural areas-data from the National Rural Children Growth Standard Survey, 2006.Asia Pacific journal of clinical nutrition, 20(4), 584-592.
[14]. Hien, N. N., &Kam, S. (2008). Nutritional status and the characteristics related to malnutrition in children under five years of age in Nghean, Vietnam. J Prev Med Public Health, 41(4), 232-240.
[15]. Chen, L.C., Huq, E. and d’Souza, S., 1981. Sex bias in the family allocation of food and health care in rural Bangladesh.Population and development review, pp.55-70.
[16]. Dewey, K.G. and Begum, K., 2011. Long‐term consequences of stunting in early life.Maternal & child nutrition, 7(s3), pp.5-18.
[17]. World Health Organization, 2014. Global nutrition targets 2025: Stunting policy brief.https://www.who.int/nutrition/publications/globaltargets2025_policybrief_stunting/en/
[18]. Bose, K., Bisai, S., Chakraborty, J., Datta, N. and Banerjee, P., 2008. Extreme levels of underweight and stunting among pre-adolescent children of low socioeconomic class from Madhyamgram and Barasat, West Bengal, India.Collegium antropologicum, 32(1), pp.73-77.
[19]. [National Institute of Population Research, Training (Bangladesh), Mitra and Associates (Firm) and Macro International, 2009. Bangladesh Demographic and Health Survey, 20011.NIPORT.
[20]. National Institute of Population Research and Training – NIPORT/Bangladesh, Mitra and Associates/Bangladesh, and ICF International. Bangladesh Demographic and Health Survey 2014. Dhaka: NIPORT, Mitra and Associates, and ICF International; 2016.
[21]. Das, S., &Gulshan, J. (2017). Different forms of malnutrition among under five children in Bangladesh: a cross sectional study on prevalence and determinants. BMC Nutrition, 3(1), 1.
[22]. Basu, A.M., 1993. How pervasive are sex differentials in childhood nutritional levels in South Asia?.Social biology, 40(1-2), pp.25-37.

Sukanta Das, Habiba Akter, Abdul Muyeed “Variability of Malnutrition by Gender among Under Five Children in Bangladesh: Illustration Using Bangladesh Demographic and Health Survey, 2011 and 2014 Data” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.15-18 January 2019  URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/15-18.pdf

Download PDF

pdf

Infrastructure Growth and Capital Market Challenges in India

Apurva Mehta – January 2019 Page No.: 19-29

India has embarked upon an ambitious target of spending Rs. 10,525 billion on infrastructure growth and development. This monetary target may well be on course from a tax payer’s perspective, however can we say that all is kosher in this regard. There is no long tenor Rupee yield curve which is the “acceptable” benchmark for the Institutional Investors community. This renders the scope for infrastructure growth much more daunting. In this paper there is a point of view expressed in the context of the “features” of the Indian debt and equity markets which make it an uphill task for the sustainable monetization of the physical assets. This precludes them from being self-sustaining. Infrastructure is the backbone of any economy. Infrastructure needs heavy investments which means over 50 percent of funds come from government and domestic Financial Institutions as well as cross border pension funds, endowments agencies and the like.

Page(s): 19-29                                                                                                                   Date of Publication: 22 January 2019

  Apurva Mehta
Associate Professor, Durgadevi Saraf Institute of Management Studies, Mumbai, India

[1]. Economic Times. (2018, January 29). The Economic Times. Retrieved December 9, 2018, from The Economic Times: https://economictimes.indiatimes.com/news/economy/infrastructure/india-needs-4-5-trillion-by-2040-to-develop-infra-eco-survey/articleshow/62694945.cms
[2]. indonesia-investments. (2017, June 23). Retrieved December 9, 2018, from www.indonesia-investments.com: https://www.indonesia-investments.com/business/risks/infrastructure/item381
[3]. economictimes. (2018, january 29). Retrieved December 7, 2018, from economictimes: https://economictimes.indiatimes.com/news/economy/infrastructure/india-needs-4-5-trillion-by-2040-to-develop-infra-eco-survey/articleshow/62694945.cms
[4]. Agrawal, P. (2016). iegindia. Retrieved December 7, 2018, from iegindia: http://www.iegindia.org/upload/publication/Workpap/wp350.pdf
[5]. Asian Development bank. (2017, May 8). ADB. Retrieved December 8, 2018, from ADB: https://www.adb.org/news/features/infrastructure-development-asia-12-things-know
[6]. Behere, J. (2018, April 20). CMIE. Retrieved December 6, 2018, from CMIE: https://www.cmie.com/kommon/bin/sr.php?kall=warticle&dt=2017-04-20%2012:37:55&msec=996
[7]. cprindia. (2017). cprindia. Retrieved December 7, 2018, from cprindia: http://cprindia.org/news/5978
[8]. DMIC. (2014). DMIC. Retrieved December 4, 2018, from DMIC Website: http://delhimumbaiindustrialcorridor.com
[9]. FICCI. (2016, September). FICCI. Retrieved December 6, 2018, from FICCI Site: http://ficci.in/spdocument/20792/FICCI-Infrastructure-Financing-2016.pdf
[10]. FPJ Web Desk. (2018, June 7). Freepress. Retrieved December 4, 2018, from freepress website: https://www.freepressjournal.in/mumbai/mumbai-mmrda-begins-work-on-22-km-long-mthl-bridge/1291514
[11]. Gulf Times. (2018, August). https://www.gulf-times.com/story/604179/Sukuk-remains-a-key-vehicle-for-infrastructure-fin. Retrieved December 09, 2018, from https://www.gulf-times.com/story/604179/Sukuk-remains-a-key-vehicle-for-infrastructure-fin: https://www.gulf-times.com/story/604179/Sukuk-remains-a-key-vehicle-for-infrastructure-fin
[12]. hochtief-solutions. (n.d.). hochtief-solutions. Retrieved December 09, 2018, from hochtief-solutions: http://www.hochtief-solutions.com/solutions_en/236.jhtml
[13]. IBEF. (2018, November 1). IBEF. Retrieved November 29, 2018, from IBEF Website: https://www.ibef.org/industry/infrastructure-presentation
[14]. IBEF. (2018, September 1). IBEF. Retrieved November 29, 2018, from IBEF Website: https://www.ibef.org/industry/ports-india-shipping.aspx
[15]. IBEF. (2018, Saptember 1). IBEF. Retrieved November 29, 2018, from IBEF Website: https://www.ibef.org/industry/indian-railways.aspx
[16]. IBEF. (2018, November 1). IBEF. Retrieved November 29, 2018, from IBEF Website: https://www.ibef.org/industry/roads-india.aspx
[17]. IBEF. (2018, September 1). IBEF. Retrieved November 29, 2018, from IBEF Website: https://www.ibef.org/industry/power-sector-india.aspx
[18]. IBEF. (2018, November 1). IBEF. Retrieved November 29, 2018, from IBEF Website: https://www.ibef.org/industry/indian-aviation.aspx
[19]. IBEF. (2018, October 1). IBEF. Retrieved December 1, 2018, from IBEF website: https://www.ibef.org/industry/telecommunications.aspx
[20]. IBEF. (2018, November 1). IBEF. Retrieved December 2, 2018, from IBEF Website: https://www.ibef.org/industry/renewable-energy.aspx
[21]. iigf. (n.d.). IIGF. Retrieved December 09, 2018, from IIGF: http://www.iigf.co.id/en
[22]. Jaffee, D. M. (2009). THE APPLICATION OF MONOLINE INSURANCE. C Risk Management and Insurance Review, 2009, Vol. 12, No. 1, 11-23.
[23]. Kwon, O. (2011). http://growthdialogue.org. Retrieved December 09, 2018, from http://growthdialogue.org: http://growthdialogue.org/growthdialog/wp-content/uploads/2017/09/Korea-Infrastructure_ebook.pdf
[24]. MCGM. (2018). MCGM. Retrieved December 4, 2018, from MCGM website: https://portal.mcgm.gov.in/irj/portal/anonymous/qlprjdtlcs
[25]. Mishra, s. (2012, December). trustlegal. Retrieved December 7, 2018, from trustlegal: https://www.trustlegal.in/uploads/files/1456557544.pdf
[26]. outlook.gihub.org. (n.d.). outlook.gihub.org. Retrieved December 09, 2018, from outlook.gihub.org: https://outlook.gihub.org/countries/India+Malaysia+Indonesia
[27]. PANDIT, V. (2014, june 3). THE Hindu. Retrieved December 4, 2018, from The Hindu business line: https://www.thehindubusinessline.com/news/modis-gift-city-achieves-phase-i-financial-closure-for-rs-1157-cr/article20791055.ece1
[28]. Perdiguero, A. (2017, August 29). unescap. Retrieved December 8, 2018, from unescap: https://www.unescap.org/sites/default/files/SEA_01_Day%201%20PM_Mr%20Alfredo%20Perdiguero_Infrastructure%20Financing%20Challenges%20in%20Southeast%20Asia%20%28Aperdiguero%2029%20Aug%202017%29.pdf
[29]. PWC. (2018). www.pwc.com. Retrieved December 09, 2018, from www.pwc.com: https://www.pwc.com/th/en/deals/assets/public-private-partnerships-in-thailand-2018.pdf
[30]. Regan, M. (2017). Capital Markets, Infrastructure Investment and.
[31]. Sharma, R. (2018, June 30). Financial Express. Retrieved December 5, 2018, from Financial Express: https://www.financialexpress.com/infrastructure/mumbai-coastal-road-construction-to-start-from-october/1225987/
[32]. SMI. (n.d.). SMI. Retrieved December 9, 2018, from SMI: https://www.ptsmi.co.id
[33]. The Securities and Exchange Commission, T. (n.d.). The Securities and Exchange Commission, Thailand. Retrieved December 09, 2018, from The Securities and Exchange Commission, Thailand: https://www.sec.or.th/EN/RaisingFunds/MutualFundOtherProduct/Pages/webpage/infrastructurefund.aspx
[34]. Tower and Infrastructure providers association. (2017, August 24). TRAI. Retrieved December 1, 2018, from TRAI Website: https://trai.gov.in/sites/default/files/presentations_&_cv/Day-2_24Aug2017/Session4_Infra%20Sharing/Telecom%20Infrastructure_Umang%20Das_Latest.pdf
[35]. Wahyu Utomo, R. H. (2016, July 15). Retrieved December 9, 2018, from www.ukabc.org.uk: http://www.ukabc.org.uk/wp-content/uploads/2016/08/160711_BKPM-London_Infrastructure-Investment-Opportunity-in-Indonesia_v11_Final-003.pdf
[36]. www.narendramodi.in. (2016, March 4). Narendra Modi. Retrieved December 3, 2018, from Narendra modi website: https://www.narendramodi.in/od/pm-modi-at-the-launch-of-setu-bharatam-project-in-vigyan-bhavan-new-delhi-427752
[37]. YELLURKAR, D. (2018, january 19th). NDMA. Retrieved November 29, 2018, from https://ndma.gov.in: https://ndma.gov.in/iwdri/ppts/16jan/TS%203A/IWDRI2018_TS3A_Yellurkar_IDFC.pdf

Apurva Mehta “Infrastructure Growth and Capital Market Challenges in India” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.19-29 January 2019  URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/19-29.pdf

Download PDF

pdf

A Study on Concrete Mix Design of Partial and Full Replacement of Copper Slag with Fine Aggregate
A.K.Karthikeyan, N.Monickavarsa, M.Sandya – January 2019 – Page No.: 30-34

Sand has by now become the most widely consumed natural resource on the planet after water and air. The annual world consumption of sand is estimated to be 40 billion tons, with a respective trade volume of 70 billion dollars. But nowhere is the struggle for sand more ferocious than in India, Hence an immediate replacement for River sand is necessitated, In this fast growing world where the industries are growing at faster rate especially metallic industries producing copper and iron where their slags are the major waste products having high strength. Many researchers have already found it possible to use Copper slag as a concrete aggregate, because copper slag has similar particle size characteristics likely to that of sand. Hence the study focuses on the various percentage replacement of Copper Slag with Fine aggregate varying from 38% to 52% at interval of 2%, since replacement of 40% to 50% shows strength improvement. Complete and no replacement i.e., 100% and 0% were also taken into account. Mix design for each % replacement is calculated and Cubes were casted for 28 days curing period. Finally the specimens were Compression tested and % replacement with maximum increase in strength is identified.

Page(s): 30-34                                                                                                                   Date of Publication: 24 January 2019

 A.K.Karthikeyan
Assistant. Professor, Department of Civil Engineering, ULTRA College OF Engineering and Technology, Madurai, Tamil Nadu, India

 N.Monickavarsa
B.E Student, Department of Civil Engineering, ULTRA College OF Engineering and Technology, Madurai, Tamil Nadu, India

 M.Sandya
B.E Student, Department of Civil Engineering, ULTRA College OF Engineering and Technology, Madurai, Tamil Nadu, India

[1]. Brindha D and Nagan S, “Durability studies on copper slag admixed concrete“, Asian journal of civil engineering (building and housing), Vol.12, No.5, 2011, pp. 563-578.
[2]. M. V. Patil, “A study on properties and effects of Copper slag in concrete”, 18th IRF International Conference, 11th January 2015, Pune, India.
[3]. V. Sushma and Dr. T. Suresh Babu “A Study on the Partial Replacement of Fine Aggregate with Copper Slag”, International Journal of Innovative Research in Engineering & Management (IJIREM) , Volume-2, Issue-4, July 2015
[4]. Chidanand Soudi, Maneeth P D and Brijbhushan “Assessment of Mechanical and Durability Characteristics of Concrete Containing Copper Slag”, International Research Journal of Engineering and Technology (IRJET), Volume: 02 Issue: 08 | Nov-2015.
[5]. AS Alnuaimi, “Effects of Copper Slag as a Replacement for Fine Aggregate on the Behavior and Ultimate Strength of Reinforced Concrete Slender Columns”, TJER 2012, Vol. 9, No. 2, 90-102.
[6]. M. C. Nataraja, G. N. Chandan, T. J. Rajeeth “Concrete mix design using Copper slag as Fine aggregate”, International journal of Civil Engineering and Technology (IJCIET), Volume 5, Issue 9, September (2014), pp. 90-99.
[7]. Deepak Gowda, Dr. H. B. Balakrishna,”Experimental Study on Flexural Behavior of Reinforced Concrete Beams by Replacing Copper Slag as Fine Aggregate”, International Journal of Civil and Structural Engineering Research ISSN 2348-7607 (Online) Vol. 2, Issue 1, pp: (97-103), Month: April 2014 – September 2014,

A.K.Karthikeyan, N.Monickavarsa, M.Sandya “A Study on Concrete Mix Design of Partial and Full Replacement of Copper Slag with Fine Aggregate” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.30-34 January 2019 URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/30-34.pdf

Download PDF

pdf

Balancing Worklife; Enhancing Improved Employee Performance in the Banking Sector of Bayelsa State, Nigeria
Dr Patrick N Nwinyokougi, Zite, N Precious – January 2019 – Page No.: 35-42

This study concerned its empirical focus on the burden of work employees of commercial banks in Nigeria, especially Bayelsa state face and the stress it brings into their personal lives viz a viz its relationship with performance at work. Four Hundred (400) staff of the commercial banks was surveyed as the total population from all the banks branches in the state. To derive a study sample from the total population, the Krejcie and Morgan sample determination table was used to extract 196 respondents. Data gathered with the aid of structured close-ended questionnaire were tested using Pearson Moment Correlation Coefficient and presented using (SPSS). The study established strong significant relationship between work-life balance and employee productivity of commercial banks in Yenagoa, Bayelsa State. The tests of partial correlation showed that organizational culture and leadership have strong moderating effects work-life balance and employee productivity in the banks studied.

Page(s): 35-42                                                                                                                   Date of Publication: 01 February 2019

 Dr Patrick N Nwinyokougi
Department of Office and Information Management, Faculty of Management Sciences, Rivers State University, Port Harcourt, Nigeria

 Zite, N Precious
Department of Office and Information Management, Faculty of Management Sciences, Rivers State University, Port Harcourt, Nigeria

[1]. Eby, L.T., Casper, W.J., Lockwood, A., Bordeaux, C., Brindley, A. (2005). Work and family research in IO/OB: Content analysis and review of the literature (1980– 2002). Journal of Vocational Behaviour, 66(3), 124–197.
[2]. Azeem, S.A, &Akhtar, N. (2014). The influence of work life balance and job satisfaction on organizational commitment of healthcare employees’. International Journal of Human Resource Studies, 4(2), 18-24.
[3]. Zedeck, S. ( 1992). Exploring the Domain of Work and Family Concerns. In Work Families, and organizations. San Francisco, CA: Jossey-Bass, 1992, pp. 1-32.
[4]. Clark, S.C. & Farmer, P.M.K. (2000). Living In Two Different Worlds: Measuring Cultural and Value Differences Between Work and Home, and Their Effect on Border- Crossing.Paper presented at the Institute of Behavioral and Applied Management Annual Conference, Orlando, FL, October, 1998.
[5]. Hudson Resourcing. (2005). The case for work/life balance: Closing the gap between policy and practice. Hudson Australia and New Zealand available on www.hudson.com
[6]. De Cieri, H., &Bardoel, E. A. (2009). What does “work-life management” mean in China and Southeast Asia for MNCs? Community, Work and Family, 12(2), 179-196.
[7]. Clarke, M., Koch, L., & Hill, E.(2004). The Work–Family Interface: Differentiating Balance And Fit”, Family and Consumer Sciences Research Journal, 33(2), 121-140.
[8]. Skinner, B. F. Science and Human Behavior (1953) New York: Macmillan
[9]. Lee, C. M., Elke, D. & Dobson, R. D. 2009).Work-Life Balance for Early Career Canadian sychologists In Professional Programs Canadian Psychology’. Canadian Psychological Association, 50 (2), 73–82.
[10]. Lewis, S., Rapoport, R. & Gambles, R. (2007). The constraints of a Work-Life Balance Approach: An International Perspective. The International Journal of Human Resource, 18(3), 360 373.
[11]. Dissanaya. M &Hussain, A. (2013). Impact of Work-Life Balance on Employees Performance: An Empirical Study on Seven Apparel Organization in Sri lanka. Proceedings of the Third International Symposium Factors Affect Productivity.
[12]. McPherson, M., & Reed, P. (2007). Work-life balance in the New Zealand context, in Waring, M., &Fouche, C. Managing mayhem: Work-life balance in New Zealand.
[13]. Fapohunda, T. M. (2014). An Exploration of the Effects of Work-Life Balance on Productivity. Journal of Human Resource Management and Labour Studies, 2(2) 71- 89.
[14]. Kamau, J. M, Muleke V, MakayaS.O, &Wagoki, J. (2013). Work life Balance Practices on Employee Performance of Ecobank Kenya. European Journal Business and Management, 5(25), 179-185.

Dr Patrick N Nwinyokougi, Zite, N Precious “Balancing Worklife; Enhancing Improved Employee Performance in the Banking Sector of Bayelsa State, Nigeria” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp. 35-42 January 2019 URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/35-42.pdf

Download PDF

pdf

Hairdressers’ Knowledge, Perception and Self-Protective Measures towards Harmful Chemical Exposure in Ilishan-Remo, Ogun State

Olaoye Titilayo, Oyerinde Oyewole Phd, Omozusi Mercy, Kukoyi Olasumbo & Iheanacho Chiemela- January 2019 Page No.: 43-48

Hairdressers like other workers encounter hazards in their workplace that adversely affect their health. Some of these chemicals on contact with skin over a prolonged time can cause severe burns with redness, dermatitis, can damage the respiratory tract and severe pneumonitis. Most of these can be prevented if they use personal protective equipment. Therefore, this study assessed the knowledge, perceptions and self-protective measures towards harmful chemical exposure.
The study was a cross-sectional design. The total population of hairdressers in the association was used. Data was collected using a validated semi-structured questionnaire that was interviewer administered, with a Cronbach alpha score of 0.722. It was analyzed using Statistical Package for Social Sciences (SPSS) version 21 to generate frequency tables and chi-square tests.
The results showed that almost half 65 (46.4%) of the respondents were between the age range of 25-34 years while 3 (2.1%) of the respondents were between the age range of 55-64 with the mean age of 31.25 S.D ± 8.138. More than half 92 (65.7%) of the respondents had secondary education. Almost half 69 (49.3%) of the respondents had worked for 1-5 years and few 16 (11%) of the respondents had worked for 11-15 years. More than half 83(59.3%) of the respondents are aware that hair products contain chemicals that are harmful to health. Majority 80.7% of the respondents had a negative attitude towards the use of personal protective equipment. A significant relationship was found between awareness of chemical hazards and the use of personal protective equipment (p=0.011).
In conclusion, most of the studied hairdressers had poor education, the most probable reason why some of them lack knowledge on chemicals found in salon/hair products and their effects on health and also ways to protect themselves from these chemicals. Therefore workshops or seminars organized for hairdressers by the local government health management board, educating them on the harmful effects of chemicals they are exposed to in their workplace laying emphasis on the use of personal protective equipment. This may help to increase more positive attitude towards the use of personal protective equipment.

Page(s): 43-48                                                                                                                   Date of Publication: 01 February 2019

 Olaoye Titilayo
Department of Public Health, Babcock University, Ilishan-Remo, Nigeria

 Oyerinde Oyewole Phd
Department of Public Health, Babcock University, Ilishan-Remo, Nigeria

 Omozusi Mercy
Department of Public Health, Babcock University, Ilishan-Remo, Nigeria

 Kukoyi Olasumbo
Department of Public Health, Babcock University, Ilishan-Remo, Nigeria

 Iheanacho Chiemela
Department of Public Health, Babcock University, Ilishan-Remo, Nigeria

[1]. Ameille, J. (2003). Reported incidence of occupational asthma in France, the ONAP programme. Journal of Occupational Environmental Medicine, 2003, 136-41. Retrieved from http://www.eusha.com, January 14, 2016.
[2]. Asuzu, M. C. (1994). The interaction between work and health in Occupational Health 1st Edition, Africa-link books, 1994; 5-6.
[3]. Garbaccio J. L. (2015). Adherence and Knowledge about the use of personal protective equipment between manicures and pedicures. Retrieved from http://pubmed.com. March 17, 2016
[4]. Electrocorp (2012). Chemical hazard in hair salons and spas. https://electrocorpairpurification.wordpress.com/2012/06/19/chemical-hazards-in-hair-salons-and-spas/
[5]. English, J. (2004). Disease at work: The perils of contact dermatitis for hairdressers. Dermatology in Practice, 2004, 12(3), 12-13.
[6]. Hammam, R. A. M., Ghareeb, N. S. E., Arafa, M. H. M., &Atteia, H. H. M. (2014) Genotoxicity among Hairdressers and the Level of Commitment to Occupational Safety Measures at Beauty Salons, in Zagazig City, Egypt. OccupationalDiseases and Environmental Medicine, 2, 19-29. http://dx.doi.org/10.4236/odem.2014.22003
[7]. Leino, T. (2001). Epidemiology of skin and respiratory diseases among hairdressers. Finnish Institute of Occupational Health. Retrieved from http://eusha.com. November 25, 2015.
[8]. Leino, T., Tammilehto, L., Hytönen, M., Sala, E., Paakkulainen, H., Kanerva, L. (1998)Occupational skin and respiratory diseases among hairdressers. Scand J Work Environ Health 1998;24(5):398-406.
[9]. Karjalainen, A., Kurppa, K., Virtanen, S., Keskinen, H., Nordman, H. (2000). Incidence of occupational asthma by occupation and industry in Finland. Am J Ind Med 2000; 37:451-458.
[10]. Jack, M. W. (2009). Development of a health-belief-model-based instrument to assess worker beliefs about using personal protective equipment. Department of Health Promotion University of Utah. Retrieved from http://occmed.com, January 17, 2016.
[11]. Mendes, A., Madureira, J., Neves, P., Carvalhais, C., Laffon, B., & Teixeira, J. P. (2011): Chemical Exposure and Occupational Symptoms Among Portuguese Hairdressers, Journal of Toxicology and Environmental Health, Part A, 74:15-16, 993-1000.
[12]. Nemer, M. Y. (2009). A cross-sectional occupational health study among female hairdressers in Hebron City, Palestine. Occupational Epidemiology and Biological Research Laboratory, Department of Biology, Hebron University, Palestine. Retrieved from http://researchgate.com March 12, 2016.
[13]. Okojie, O. H., &Isah, E. C. (2001). Assessment of occupational hazards among beauticians in Benin-City. Nigerian Journal of Clinical Practice June 2001; Vol. 4 (1); 25-27
[14]. Olsson, A. C. (2013). Lung Cancer Risk Among Hairdressers: A Pooled Analysis of Case-Control Studies Conducted between 1985 and 2010. American Journal of Epidemiology 2013-10-30.
[15]. Omokhodion, F. O., Balogun, M. O., & Ola-Olorun, F. M. (2009). Reported occupational hazards and illnesses among hairdressers in Ibadan, Southwest Nigeria. West Afr J Med. 2009 Jan;28(1):20-3.
[16]. O’Loughlin, M. (2010). How healthy are Hairdressers? An Investigation of Health Problems of Female, West Australian Hairdressers. Retrieved from http://wileyonlinelibrary.com December 18, 2016.
[17]. O’Neal, L. J. (2013). Possible side effects from para-phenylenediamine (PPD). Retrieved from http://www.lustroushenna.com/lustrous_henna/2013/12/possible-side-effects-from-para-phenylenediamine-ppd.html February 16, 2016.
[18]. Scranton, A. (2014). Beauty and Its Beast. Unmasking the impacts of toxic chemicals on salon workers. Retrieved from http://womenvoices.org December 27, 2015.
[19]. Smit H.A., Van Rijssen, A., Vandenbrouckem J. P., Coenraads, P. J. (1994). Susceptibility to and Incidence of Hand Dermatitis in a Cohort of Apprentice Hairdressers and Nurses. Scand J Work Environ Health 1994; 20:113-121.
[20]. Uter, W., Gefeller, O., Schwanitz, H. J. (1998). An Epidemiology Study of the Influence of Season (Cold and Dry Air) on the Occurrence of Irritant Skin Changes of the Hands. Br J Dermatol 1998 (a); 138:266-272.

Olaoye Titilayo, Oyerinde Oyewole Phd, Omozusi Mercy, Kukoyi Olasumbo & Iheanacho Chiemela “Hairdressers’ Knowledge, Perception and Self-Protective Measures towards Harmful Chemical Exposure in Ilishan-Remo, Ogun State ” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.40-42 January 2019  URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/40-42.pdf

Download PDF

pdf

Development of Dual Shaft Multi Blade Waste Plastic Shredder for Recycling Purpose
Asmamaw Tegegne, Abebe Tsegaye, Ermias Ambaye, Rezen Mebrhatu – January 2019 – Page No.: 49-55

Plastics are one of the most essential engineering materials used for different applications. On processing plastic materials cutting in to the required size is one of the key operations. Cutting can be carried out using hand or motor driven machine. Shredder machine is commonly used for cutting the primary manufactured and waste plastics for further processing. Waste plastics thrown in land affect the environment and cause pollution. To reduce the pollution due to waste plastics recycling is essential task. However multi bladed and compacted in size shredder machine is one of the problems in recycling process of these waste plastics. Thus the objective of this project is to develop electrically driven dual shafted-multi bladed shredder machine using locally available machine construction materials for the purpose of recycling waste plastics for further use. Experimental method that is essential for variable and parameter control was used to carry out this project. Purposive sampling method was used for sampling and sample size was 1227x854x700mm. Angle and sharpness of the blades, space between the blades etc. were considered as essential variables and cutting speed, revolution per minute were considered as some of the parameters. Simple manufacturing tools including measuring tools and machines were used for constructing the shredder.
The 1.5kwtt capacity motor driven with a production rate of 11kg/per hr. shredder was developed and tested as well as approved. The total cost of the shredder was 1455.48USD and is affordable. Using the newly developed machine enhances economic development by saving the foreign currency spends for the provision of new machines.

Page(s): 49-55                                                                                                                   Date of Publication: 02 February 2019

 Asmamaw Tegegne
Federal Technical and Vocational Education and Training Institute, Ethiopia

 Abebe Tsegaye
Dila Polytechnic College, Ethiopia

 Ermias Ambaye
Nefas Silk Polytechnic College, Ethiopia

 Rezen Mebrhatu
Addis Ababa Polytechnic College, Ethiopia

[1]. Rosen, R.L.(1993). Fundamental Principles of Polymeric Materials, 2nd edition,New York, John Wiley &Sons,.
[2]. Leidner, J.(1981). Plastics Waste: Recovery of Economic Value, volume I,New York, Marcel Dekker, Inc,
[3]. Asst prof. S.Nithyananth, Libin Samuel et al,(2014).“Design of Waste Shredder Machine”, Int. Journal of Engineering Research and Applications, Vol. 4, Issue 3(Version 1).
[4]. I.M. Sanjay Kumar,(2015).Design and Development of Agricultural Waste Shredder Machine , International Journal of Innovative Science, Engineering& Technology, Vol. 2 Issue 10.
[5]. S.Nithyananth,( 2014). “ Design of Waste Shredder Machine” Libin Samuel et al Int. Journal of Engineering Research and Applications Vol. 4, Volume II,
[6]. Igbinomwanhia, D.I.( 2001). Status of Waste Management, Integrated Waste Management. (2001) (78-85).
[7]. Lynch, J. and Nauman, E.,( 1989) .Separation of Commingled Plastics by Selective Dissolution”, Proceedings of Society of Plastics Engineers,North Carolina, RETEC.
[8]. Rosen, R.L.( 2001). Fundamental Principles of Polymeric Materials, 3rd edit.,New York, John Wiley &Sons
[9]. Robert L .Mott, RE,(2004). Machine elements in Mechanical Design, John Wiley & Sons, Inc
[10]. J.EShigley and C.R Mischke, (1989). Mechanical Engineering Design, McGraw Hill Publication
[11]. MichaelF.Ash, (2005). Materials Selection, 3rdEdition,New Delhi,McGraw-hill
[12]. Mikell P. Groover, (2010). Fundamentals of Modern Manufacturing, Lehigh University,4thEdition,USA
[13]. Lindleyr.HigginsR.KeithMobeley, Maintenance engineering hand book, six Edition,New York,McGraw-hill
[14]. WIERDA, L. S. 1991. Linking design, process planning and cost information by feature-based modelling,, Journal of Engineering Design

Asmamaw Tegegne, Abebe Tsegaye, Ermias Ambaye, Rezen Mebrhatu “Development of Dual Shaft Multi Blade Waste Plastic Shredder for Recycling Purpose” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.49-55 January 2019 URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/49-55.pdf

Download PDF

pdf

Performance Analysis of Thermal Characteristics of Transient Heat Transfer through Finite Fins of Various Shape of Notches
Aartee. S. Lokhande, Bhushan Behede, Rajesh Dahibhate – January 2019 – Page No.: 56-61

The present article investigate the analysis of transient heat conduction through fins. Fins re the extend surface used for enhancing the dissipation of heat transfer rate and different geometrical fins are used as per requirement its accessibility depends. Fins are extensively used in that heat exchanging device in automobile radiators industrial sector, power plant newer technology like fuel cells. Earlier work under steady state conduction heat been carried out extensively. Transient heat conduction analysis for this is being considered for simplify heat transfer queries. Transient closed from solution had been derived earlier by various researchers. As proper heat dissipation results in saving of power of lesser changes over heating problems, perforation on made the fins. Perforated fin improves heat transfer rate collate to solid fin by varying different parameter like shape of performance For the purpose of contrast and optimizations, notch of different aspect ratio a single plate have also been analysis in a lengthwise short array where the single plate have also chimney flow pattern of present, the central portion of fin flat becomes futile due the fact that, the heated air comes in its contact. In the present study the fin of different geometries are modify by deposing the central fin portion by cutting a triangular, rectangular and un-notch fins. This articals present a performance analysis of the thermal characteristics of Transient heat transfer for finite finite fins and various shape of notches on single plate for that an experimental setup is developing and also shows a comparison between the experimental result obtained by using ANSYS software.

Page(s): 56-61                                                                                                                   Date of Publication: 02 February 2019

 Aartee. S. Lokhande
PG Student, G. H. Raisoni Institute of Engineering and Management, Jalgaon, M.S. India

 Bhushan Behede
Professor, Department of Mechanical Engg. G. H. Raisoni Institute of Engineering and Management Jalgaon, M.S. India

 Rajesh Dahibhate
H.O.D, Department of Mechanical Engg. G. H. Raisoni Institute of Engineering and Management Jalgaon, M.S. India

[1]. “Exact Solution for Transient Heat Conduction through long Fin ISSN 2278-361X Volume 4,number 1 [2013],pp.1-9
[2]. Analysis of Thermal Characteristics of Transient Heat Conduction Through Long and Comparison with Exact Fin Theory Quasi Steady Theory;-Arun kumar Sao, Dr. Yamuna Prasad Banjare [ISSN 2250-2459 ,ISO 9001 ;2008 Certified journal , volume 4, Issue 11, November 2014.]
[3]. Heat transfer improvement of a wet fin under transient response with unique design arrangement aspect. Balaram kundu , Rajan das Pramod A. Wankhede , Kwan –soo Lee. 23 august 2018
[4]. Establishment of non-Fourier Heat conduction model for an accurate transient thermal response in wet fins. Pramod A. Wakhede , Balaram Kundu 17 may 2018
Study Heat Transfer through a Two –Dimensional Rectangular Straight Fin; Raseelo J. Moitsheki and Atish Rowjee ; 14 february 2011.

Aartee. S. Lokhande, Bhushan Behede, Rajesh Dahibhate “Performance Analysis of Thermal Characteristics of Transient Heat Transfer through Finite Fins of Various Shape of Notches ” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp. 56-61 January 2019 URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/56-61.pdf

Download PDF

pdf

A Review Paper on Cloud Computing

Sanjam Singh, Er. Preeti Rani – January 2019 Page No.: 62-64

Cloud computing is used by a large number of organizations now a days. It is as the biggest development of the decade in computing. This paper introduces review on cloud computing in detail.

Page(s): 62-64                                                                                                                   Date of Publication: 05 February 2019

 Sanjam Singh
Student of Information and Technology Engineering, Chandigarh University, Gharuan, Punjab, India

 Er. Preeti Rani
Assistant Professor of Electrical Engineering, Chandigarh University, Gharuan, Punjab, India

[1]. V Rajaraman, Fundamentals of Computers, 5th Edition, PHI Learning, New Delhi 2010.
[2]. Montella, R.,& Agrillo, Abstract Execution Framework: Java Interface for Out of the Process Execution, (DSA Technical Report, Napoli), june 2009.
[3]. Ohlman, B., Eriksson, A., Rembarz, R. (2009) What Networking of Information Can Do for Cloud Computing. The 18th IEEE International Workshops on Enabling Technologies: Infrastructures for Collaborative Enterprises, Groningen, The Netherlands, June 29 – July 1, 2009.
[4]. Jeffrey Shafer, I/O Virtualization Bottlenecks in Cloud Computing Today, Proceedings of the Second Workshop on I/O Virtualization, Pittsburgh, PA, USA, Mar. 2010.
[5]. R. Buyya, C.S. Yeo, Venugopal, Market-Oriented Cloud Computing: Vision, Hype, and Reality for Delivering IT Services as Computing Utilities, 10th IEEE Int. Conference on High Performance Computing and Communications, HPPC 2008, Dalian, China, Sept. 2008.
[6]. Ronald L. Krutz, Russell Dean Vines ―Cloud Security A Comprehensive Guide to Secure Cloud Computing‖, Wiley Publishing, Inc., 2010
[7]. Kevin et.al. ―Security Issues for Cloud Computing‖, International Journal of Information Security and Privacy, 2010

Sanjam Singh, Er. Preeti Rani “A Review Paper on Cloud Computing” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.62-64 January 2019  URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/62-64.pdf

Download PDF

pdf

Alpha Tocopherol, Bilirubin and Some Liver Enzymes in Sickle Cell Subjects
Muhammad Y, Maryam Z, Ahmad MB, Habeeb A and Zainab I. – January 2019 – Page No.: 65-67

Derangement in liver enzymes and hyperbilirubinemia in Sickle cell disease (SCD) has long been documented, generation of free radicals via Fenton’s reaction results in oxidative stress. The serum levels of alphatocopherol, bilirubin and some liver enzymes were determined in forty-eight subjects (34 SCD and 14 apparently healthy age-sex matched controls). The serum levels of liver enzymes and bilirubin were significantly higher compared to the controls (p<0.005). Serum levels of Malondialdehyde (MDA) was significantly higher in sickle cell patients (p<0.005) than the controls. In conclusion, according to the findings of these results, SCD is associated with oxidative stress and deranged liver physiology. Supplementation and antioxidant and monitoring of liver physiology should be encouraged.

Page(s): 65-67                                                                                                                   Date of Publication: 07 February 2019

 Muhammad Y
Department of Chemical Pathology, Rasheed Shekoni Teaching Hospital Dutse, Nigeria

 Maryam Z
Department of Microbiology, Faculty of Sciences, Ahmadu Bello University Zaria, Nigeria

 Ahmad MB
Department of Chemical Pathology, School of Medical Laboratory Science, Bayero University Kano, Nigeria

 Habeeb A
Department of Hematology and Blood Transfusion, Rasheed Shekoni Specialist Hospital, Dutse, Nigeria

 Zainab I.
Department of Microbiology, Faculty of Sciences, Ahmadu Bello University Zaria, Nigeria

[1]. Almeida, A. and Roberts, I. (2005); Bone involvement in sickle cell diseases. Br J Haematol129(4): 482-490.
[2]. Azubuike, J and Nkanginieme, K.E.O. (2007); Paediatrics and Child health in tropical region. African educational services. 2nd Edition Owerri. 373-380.
[3]. Barnerjees, S, Owen, C., Chopra, S et al., (2001); Sickle cell Hepathology. Hepathology. 33: 21-28.
[4]. Beutler, E., Lichtman, M.A., Coller, B.S., Kipps, T.J., Seliggsohn, U., eds Williams(1999).The sickle cell disease and related disorders.HematologyNew York: McGraw Hill 581-605.
[5]. Carl, A., Edward, R., Ashwood et al., (2008). Vitamins and trace elements, Tetz Fundamentalsof Clinical chemistry, 6th edition McGraw Hill London 479-491.
[6]. Carrell, R.W., Winterburn, C.C., and Rachmitewitz., E.A. (1975). Activated oxygen and hemolysis. Br Haematol. 30: 259-264.
[7]. Cheesborough, M. (2006). District Laboratory Practice in trophical countries. Cambrodge, UK 122-124.
[8]. Chukwu, LC., Uwakwe, A.A. and Chinaka, N.C. (2012). Liver enzymes in normal and sickle cell subjects. Journal of Natural Sciences Research 7 (2); 103.
[9]. Dacie and Lewis (2010); Introduction to practical Hematology. Arch Intern Med 129-140.
[10]. Essien, E.V. (1995); Plasma levels of retinol, ascorbic acid and alphatocopherol in sickle cell anemia. Cent. Afr Med; (41): 48-50.
[11]. Hassel, K.L., Eckman, J.R., Lane, P.A. (1994). Acute multiorgan failure syndrome; Potentially catastrophic complication of severesickle cell pain episodes. Am J Med. (96):155-162.
[12]. Kakarala, S., Lindberg, M (2004). Safely of liver biopsy in acute sickle hepatic crisis. Conn. Med (68) 277-279.
[13]. Kofila, T., Adedapo, K. Adedapo, A.(2005); Liver dysfunction in steady stte sickle cell disease. Annals of Hepatology 4 (4): 261-263.
[14]. Manfredin, V., Lavermann., L.L., Heinzmann, G.I. et al., (2008). Blood Antioxidant Parameters in sickle cell Anemia in Steady State. Journal of the National Medicine Association; 8(100); 897-902.
[15]. Pandey, S., Sharma, A., Dalia,Set al., (2017). Biochemical indicators of sickle cell disease. Preliminary Report from India. Ind. J Clin Biochem; 27(2)191-195.
[16]. Pearson, H. (1977). Sickle cell anemia and severe infections due to encapsulated bacteria. I infect. Dis. 136: 525-530.
[17]. Platt, O.S., Brambilla, D.J. and Rosse, W.F. (1994); Mortality in sickle cell disease. Life expectancy and risk factors for early death.. N Engl. J. Med. 330 (23): 1639-1644.
[18]. Rice-Evans, C., Omorpfos, S.C., and Baysal, E. (1986). Sickle cell membranes and Oxidative damage. Biochem J 237: 265-269.
[19]. Satyaranayana (2006). Free radicals and antioxidants. Biochemistry, 2nd edition Kolkata. 655-657.
[20]. Tukur, M.A., Odeh, S.O. Ambe, J. et al., (2015). Vitamin E sttus of steady state sickle cell anemia patients compared to normal controls. International Journal of Medicine and Medical Sciences Research;31(1) 6-12.

Muhammad Y, Maryam Z, Ahmad MB, Habeeb A and Zainab I. “Alpha Tocopherol, Bilirubin and Some Liver Enzymes in Sickle Cell Subjects” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.65-67 January 2019 URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/65-67.pdf

Download PDF

pdf

A Survey on Sentiment Analysis for Product Recommendation System using Hybrid Learning Algorithm

S. Dorthy Infanta, P.Chellammal – January 2019 Page No.: 68-72

Large amount of information are available on websites. Information extraction takes place in huge volumes. When queries are submitted to search engines they are generally in natural languages and contains just one or two related words. Because of this Search engines are unable to recognize natural language and thus it becomes very difficult to extract the proper information from website for the user’s interest. Recommended techniques are designed in such a way that they support various types of data sources. These data sources are in the form of DVD, books, and electronics. The algorithms are based on item to item base cross-modal hyper graph.These are applied to find the similarities between item and users respectively. One of the algorithms called Slope one algorithm is used to find out the rating of un-rated items. In this survey paper the hybridization of Algorithms will leads to efficient results.

Page(s): 68-72                                                                                                                   Date of Publication: 08 February 2019

 S. Dorthy Infanta
M.E. Student, Department of Computer Science and Engineering, JJ College of Engineering and Technology, Trichy, Tamil Nadu, India

 P.Chellammal
Assistant Professor, Department of Computer Science and Engineering, JJ College of Engineering and Technology, Trichy, Tamil Nadu, India

[1]. D.-M. Koo, “Impact of tie strength and experience on the effectiveness of online service recommendations,” Electron. Commerce Res. Appl., vol. 15, pp. 38-51, Jan./Feb. 2016.
[2]. G. Wang, “Sentiment classification: The contribution of ensemble learning,’ Decision Support Syst,pp. 77-93, vol. 55 , Jan. 2014.
[3]. Y. Lu, X. Kong, X, Quan, W. Liu, and Y. Xu, “Exploring the sentiment strength of user reviews,” in Proc. 11th Int. Conf. Web-Age Inf. Man- age. (WAIM), Jiuzhaigou, China, volume 6184,pp. 471-482,Jul. 2010.
[4]. H. Wang and M. Ester, “A sentiment-aligned topic model for product aspect rating prediction,” in Proc. Conf. Empirical Methods Natural Lang. Process,pp. 1-11, 2014
[5]. B. Xiang and L. Zhou, “Improving Twitter sentiment analysis with topicbased mixture modeling and semi-supervised training,” in Proc. Meeting Assoc. Comput. Linguistics, pp. 1-6, 2014.
[6]. W. X. Zhao, J. Jiang, H. Yan, and X. Li, “Jointly modeling aspects and opinions with a MaxEnt-LDA hybrid,” in Proc. Conf. Empirical Methods Natural Lang. Process. Assoc. Comput. Linguistics,, pp. 56-65, 2010.
[7]. Q. Zhang, L. T. Yang, Z. Chen, and P. Li, “An improved deep computation model based on canonical polyadic decomposition,” IEEE Trans. Syst., Man, Cybern., Syst,volumne-48.
[8]. C. Lin, Y. He, R. Everson, and S. Ruger, “Weakly supervised joint sentiment-topic detection from text,” IEEE Trans. Knowl. Data Eng., vol. 24, no. 6,Jun. 2011, pp. 1134-1145.
[9]. J. Jagarlamudi, H. Daumé, III, and R. Udupa, “Incorporating lexical priors into topic models,” in Proc. Conf. Eur. Chapter Assoc. Comput. Linguistics Assoc. Comput. Linguistics,, pp. 204-213, 2012.
[10]. Q. Zhang, L. T. Yang, Z. Chen, and P. Li, “PPHOPCM: Privacypreserving High-order possibilistic c-means algorithm for big data clustering with cloud computing,” IEEE Trans. Big Data.
[11]. T. H. Nguyen and K. Shirai, “Topic modeling based sentiment analysis on social media for stock market prediction,” in Proc. Meeting Assoc. Com- put. Linguistics Int. Joint Conf. Natural Lang. Process. Asian Federation Natural Language Process.,pp. 1353-1364, 2015.
[12]. T. H. Nguyen and K. Shirai, “Aspect-based sentiment analysis using tree kernel based relation extraction,” in Proc. Int. Conf. Intell. Text Process. Comput. Linguistics,pp. 114-125, 2015.

S. Dorthy Infanta, P.Chellammal “A Survey on Sentiment Analysis for Product Recommendation System using Hybrid Learning Algorithm ” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.68-72 January 2019  URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/68-72.pdf

Download PDF

pdf

A Survey on a Security Model for Electronic Health Records in Healthcare Cloud using Fog Computing
R.Roshan Joshua, G.Raja – January 2019 – Page No.: 73-78

Data safety is the most important undertaking faced through cloud garage. Cloud computing and garage solutions provide users and numerous corporations with several talents to keep and way their facts in third party facts centers. Here, imparting a way for securing statistics in cloud garage with fog computing. The need of rapid and comfortable transmission is critical in the healthcare environment. Nowadays, the transmission of scientific picture is an everyday habitual and it’s miles essential to discover an efficient manner to transmit them over the internet. In this research, suggest a new method to encrypt an image for secure and denoised transmission. This survey deals with image cryptography, records hiding and steganography. To offer higher embedding potential without sacrificing the imperceptibility, a novel steganographic approach based totally on nine-pixel differencing with modified Least Significant Bit (LSB) substitution is proposed. After LSB substitution the pixel values are readjusted to minimize distortion such that those modified values do not disturb the embedded bits. Steganography is the approach to cover the message in virtual media. This survey shows a proposed hybrid model the usage of public key Elliptical Curve Cryptography (ECC) and Steganography offers extra security than a Single ECC or Steganography technique. Application of this research is to provide important data of net clients, navy, distinct corporate sectors those which might be often the usage of public community for communication.

Page(s): 73-78                                                                                                                   Date of Publication: 08 February 2019

 R.Roshan Joshua
M.E. Student, Department of Computer Science and Engineering, JJ College of Engineering and Technology, Trichy, Tamil Nadu, India

 G.Raja
Assistant Professor, Department of Computer Science and Engineering, JJ College of Engineering and Technology, Trichy, Tamil Nadu, India

[1]. Saniket M. Kudoo, Prof. Dilip Motwani, “Fog Computing: Data Theft Detection in Cloud with Behaviour Pattern & Decoy Stuff”, International Journal of Innovative Research in Computer and Communication Engineering Vol. 4, Issue 1, January 2016,pp. 168-171.
[2]. Salvatore J. Stolfo, Malek Ben Salem and Angelos D. Keromytis, “Fog Computing: Mitigating Insider Data Theft Attacks in the Cloud”, in Proceedings of the 14th International Symposium on Recent Advances in Intrusion Detection. Heidelberg: Springer, September 2013, pp. 1–20.
[3]. Arwinder Singh, Abhishek Gautam, Hemant Kumar, Er. C.K. Raina, “Decoy Technology in Fog Computing”, International Journal of Advanced Research in Computer and Communication Engineering, Vol. 6, Issue 3, March 2017,pp. 798-804.
[4]. G. Rathi, Abinaya. M, Deepika. M¸ Kavyasri. T, “Healthcare Data Security in Cloud Computing”, International Journal of Innovative Research in Computer and Communication Engineering, Vol. 3, Issue 3, March 2015, pp. 1807-1815.
[5]. Kushan Shah and Vivek Prasad, “Security for Healthcare Data on Cloud” International Journal on Computer Science and Engineering (IJCSE), Vol. 9 No.05 May 2017, pp. 207-212.
[6]. Yin Zhang, Meikang Qiu, Chun-Wei and Atif Alamri, “Health-CPS: Healthcare Cyber-Physical System Assisted by Cloud and Big Data” in IEEE Systems Journal August 2015, pp. 1-8.
[7]. R. Josephus Arunkumar, R. Anbuselvi, “Enhancement of Cloud Computing Security in Health Care Sector” International Journal of Computer Science and Mobile Computing, Vol.6 Issue.8, August- 2017, pg. 23-31.
[8]. Divya Rayal and Smita Jangale, “Cloud based Information Security and Privacy in Healthcare”, International Journal of Computer Applications (0975 – 8887) Volume 150 – No.4, September 2016, pp. 11-15.
[9]. Huaqun wang, “Anonymous Data Sharing Scheme in Public Cloud and Its Application in E-Health Record”, IEEE Trans. Inf. Forensics Security, vol. 10, no. 1, Jan. 2015,pp. 69-78.
[10]. Qinlong Huang, Wei Yue, Yue He, Yixian Yang, “Secure Identity-based Data Sharing and Profile Matching for Mobile Healthcare Social Networks in Cloud Computing” IEEE Journal of Biomedical and Health Informatics, vol. 18, no. 4, Jul. 2014, pp. 1431-1441.

R.Roshan Joshua, G.Raja “A Survey on a Security Model for Electronic Health Records in Healthcare Cloud using Fog Computing” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp. 73-78 January 2019 URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/73-78.pdf

Download PDF

pdf

A Survey on XOR Based Visual Cryptography and LSB Method for Secured Communication

K.Saranya, K.Saravanan – January 2019 Page No.: 79-83

Visual cryptography (VC) is used to split an image into two random shares. When they are separately viewed reveals no information about the secret image but can be obtained by super imposing the two shares. k out of n visual cryptography scheme is used to encrypt a single image into n shares. The image can be decoded by using only k or more shares. Many existing visual cryptographic methods uses binary images which doesn’t suits well for many applications. Proposed a model to establish communication between the sender and the receiver. A text is hidden inside the image using LSB method. XOR based multi secret sharing is used to send images from the source to the destination in a secured way. n out of n multi secret sharing scheme is proposed. Transmission of multiple secret shares simultaneously is possible. The secret image can be revealed only when all the n shares are received by the receiver and decrypted.

Page(s): 79-83                                                                                                                   Date of Publication: 08 February 2019

 K.Saranya
M.E. Student, Department of Computer Science and Engineering, JJ College of Engineering and Technology, Trichy, Tamil Nadu, India

 K.Saravanan
Assistant Professor, Department of Computer Science and Engineering, JJ College of Engineering and Technology, Trichy, Tamil Nadu, India

[1]. Yu-Chi Chen, Member “Fully Incrementing Visual Cryptography from aSuccinct Non-Monotonic Structure” 2016 IEEE 1556-6013 vol. 6639. 2011, pp(11–46).
[2]. Her-Chang Chao , Tzuo-Yau Fan “XOR-based progressive visual secret sharing using generalized randomgrids”vol.49,2017,pp(6).
[3]. Kai-Hui Lee a, Pei-Ling Chiu “A high contrast and capacity efficient visual cryptography scheme for the encryption of multiple secret images” Vol.284,2011, pp(2629-3182).
[4]. Priyanka Singh, Balasubramanian Raman, and Manoj Misra “A (n, n) Threshold Non-expansible XOR based Visual Cryptography with Unique Meaningful Shares” vol 142,(2017),pp(301-319).
[5]. Shyong Jian Shyu” Threshold Visual Cryptographic Scheme With Meaningful Shares “vol. 21,dec 2014,pp(1521-1525).
[6]. Ching-Nung Yang , Ting-Hao Chung “A general multi-secret visual cryptography scheme” vol 283,dec 2010,pp(4949-4962).
[7]. Tsung-Lieh Lin , Shi-Jinn Horng , Kai-Hui Lee , Pei-Ling Chiu , “A novel visual secret sharing scheme for multiple secrets without pixel expansion” Expert Systems with Applications,vol.37,(2010),pp(7858–7869).
[8]. Mausumi Bose, Rahul Mukerjee “Optimal (k, n) visual cryptographic schemes for general k” IEEE Trans. Inf. Forensics Security, vol. 12,May 2011,pp(1082–1091).
[9]. Giuseppe Ateniesea, Carlo Blundob, Alfredo De Santisb “Extended capabilities for visual cryptography” vol 250,jan 2001,pp-(143-161).
[10]. Shubhangi Khairnar, Reena Kharat “A Secure and Verifiable Multi Secret Sharing Scheme for Encrypting Two Secret Images into Two Shares” International Journal of Computer Applications,Vol134, Jan 2016,pp(0975 – 8887).
[11]. Maroti Deshmukh, Neeta Nain, and Mushtaq Ahmed “A Novel Approach of an (n; n) Multi SecretImage Sharing Scheme using Additive Modulo” IEEE Signal Process.Lett., vol. 16, Aug. 2010,pp(659–662).
[12]. Her Chang Chao, TzuoYau Fan “Generating Random Grid-based visual secret sharing with multi-level encoding “International Journal of Computer Applications , Vol 41– No.18, March 2012,pp(0975 – 8887).
[13]. Chien-Chang Chen, Wei-Jie Wu , Jun-Long Chen “Highly efficient and secure multi-secret images harings cheme”vol 75,june 2016,pp(7113-7128).
[14]. Kamel Mohamed Faraoun “Design of a new efficient and secure multi-secret images sharing scheme “Vol.76,march 2017,pp(6247-6261).

K.Saranya, K.Saravanan “A Survey on XOR Based Visual Cryptography and LSB Method for Secured Communication” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.79-83 January 2019  URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/79-83.pdf

Download PDF

pdf

A Survey on Plant Classification Based on Multi Organ Features Using HGO-CNN
G.Kousalya, Dr. P.D. Sheba Kezia Malarchelvi – January 2019 – Page No.: 84-87

A good understanding of plants is essential to help in identifying new or rare plant species in order to improve the drug industry, balance the ecosystem as well as the agricultural productivity. Categorizations of plants are still remains a tedious task due to limited knowledge and information of world’s plant families. Due to the intra or interspecies diversity of plants in nature, some species are difficult or impossible to differentiate from one another using only the leaf organ. Median Filtering is a noise removal algorithm that simultaneously reduces noise and preserves edges of input image. Here first propose a HGO-CNN (Hybrid Generic Organ – Convolutional Neural Network) model to automatically learn the generic and organ features representation for plant categories, replacing the need of designing hand-crafted features as to previous approaches. After having both organ and generic features migrate its convolutional layers to learn the fusion features. Second, we propose a new framework of plant structural learning based on recurrent neural networks (RNN), namely the Plant-StructNet. After classification of plant, the specific features and uses of the plant will be analyzing through this project.

Page(s): 84-87                                                                                                                   Date of Publication: 08 February 2019

 G.Kousalya
M.E. Student, Department of Computer Science and Engineering, JJ College of Engineering and Technology, Trichy, Tamil Nadu, India

 Dr. P.S. Rao
Professor & HOD, Department of Computer Science and Engineering, JJ College of Engineering and Technology, Trichy, Tamil Nadu, India

[1]. Angie K. Reyes1, Juan C. Caicedo2, and Jorge E. Camargo, “Fine-tuning Deep Convolutional Networks for Plant Recognition,” 2015.
[2]. Jana Wäldchen1 • Patrick Made. “Plant Species Identification Using Computer Vision Techniques: A Systematic Literature Review,” vol. 25:507–543, 2018.
[3]. Ivica Dimitrovski1, Gjorgji Madjarov, Petre Lameski, and Dragi Kocev Maestra , “Plant Task: Plant Identification using Visual Data,” pp. 18, 2007.
[4]. Y. Naresh and H. Nagendraswamy, “Classification of Medicinal Plants: An Approach using Modified LBP with Symbolic Representation,” vol. 1, pp. 27–30, 2004.
[5]. A. Jolly and H. Goeau, “Multimedia Life Species Identication Challenges,” vol. 24, no. 11, pp. 4172–4184, 2015.
[6]. S. H. Lee and C. S. Chan, “How deep learning extracts and learns leaf features for plant classification,” vol. 71, pp. 1-132015.
[7]. M. D Zeiler and R. Fergus, “Visualizing and Understanding Convolutional Networks,” pp. 818-833,2014.
[8]. J. Camp and A. Joly, “A Comparative Study of fine grained classification methods,” vol.1391, 2015.
[9]. J. Chaki and R. Parekh, “Plant leaf recognition using texture and shape features with neural classifiers,”vol. 58, pp.61-68,2015.
[10]. S. Choi , “Plant identification with deep convolutional neural network,” 2015.

G.Kousalya, Dr. P.D. Sheba Kezia Malarchelvi “A Survey on Plant Classification Based on Multi Organ Features Using HGO-CNN” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.84-87 January 2019 URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/84-87.pdf

Download PDF

pdf

Professional Ethics in Engineering
Dr. Vineet Kumar Purohit – January 2019 – Page No.: 88-91

The paper aims to discuss about the essential ethics (morals or principles) regarding profession of Engineering and the requirement also of these ethics like of responsibilities, rights, desirable ideals and personal commitments in engineering. It is the study of decisions, policies, and values desirable in engineering. This study may be helpful in improving skills in moral awareness, coherence, imagination, communication and, perhaps more indirectly , strengthening respect for persons, tolerance of diversity and confidence in resolving moral conflicts to preserve integrity. Professions are the forms of work involving expertise, independent judgement, self-regulation and service to the public. Codes of ethics state the moral responsibilities of engineers as seen by the profession and represented by professional society, they express the profession’s collective commitment to ethics, codes are enormously important not only in stressing responsibilities but also the freedom to exercise the engineers. There is description of responsibilities of individual and corporative as well which will throw light on vivid meanings of it like obligations, moral accountability, praiseworthiness and blameworthiness. Professional ethics supports responsible conduct and prevents both wrong doings and doers. Importance of shared responsibilities and personal commitments also plays vital role here. An attempt has been made to elaborate and discuss the responsibilities of engineers, related to the society and human beings, in an expatiated way, as engineers are the backbone of society.

Page(s): 88-91                                                                                                                   Date of Publication: 09 February 2019

 Dr. Vineet Kumar Purohit
Associate Professor, Mahaveer Institute of Technology and Science, Pali, Rajasthan, India

[1]. John Schwartz. “Investigators Link Shuttle’s Breakup to Damage to wing” New York Times (May7, 2003), pp. a25 Nick Anderson, “NASN Is chided for Faults in Safety Teams” Los Angles Times (May 15’ 2003) p. A15 John Schwartz, “Shuttle Inquiry finds New Risk” New York Times (June 14, 2003,) pp. 73- 74.
[2]. Clive L. Dym and Patrick Little, Engineering Design: A Project- Based Introduction (New York 1986). P 73-74
[3]. Edmund L. Pickoffs, Quandaries and Virtues (Lawrence, KS, University press of Kansas.
[4]. Mihaly Csikszemibalyi, Good Business (New York: Viking, 2003), P. 206.
[5]. Petre C. Fusaro and Ross M. Miller, What Went Wrong at Enron? (New York John Wily & Sons, 2002), Loren fox, Enron, The Rise and Fall (New York: John Wile& Sons, 2003)
[6]. Banks Mc Dowel Draws attention to the importance of compliance issues in Ethics and Excuse: The Crisis in Professional Responsibility (Westport, CT: Quorum Book, 2000).
[7]. A similar case is dramatized in the video” Gianni Gold” Produced by the National Society of Professional Engineers. (See Appendix A,)
[8]. John Ladd drew this distinction in “The Quest for a Code of Professional Ethics: An Intellectual and Moral Confusion. “in Rosemary Chalk Mark S. Frankel and Sllie B. Chafer, eds. AAAs in Engineering (Englewood Cliff, NJ: Prentice Hall, 1991 \), PP 130- 36. The distinction is explored insightfully by Joseph R. Herbert in “Future Directions is Engineering Ethics Research: Micrometrics Macro ethics and Role of Professional Societies” Science and Engineering Ethics 7 (2001): 403- 14
[9]. Keith Brasher, High and Mighty (New York: Public Affairs, 2002)P 305.
[10]. Ibid, pp xvii – xviii.
[11]. National Academy of Engineering www. Greatachivemetns. Org.
[12]. Edmund L. Pickoffs. Quandaries and Virtues (Lawrence, KS: University press of Kansas 1986).p 15.
[13]. In clinical terms, sociopaths (or Psychopaths) have “national personality disorder” Only a minority of sociopaths are violent, which is fortunate given that by some estimates 3 percent of American males and 1 percent of American females have antisocial personality disorder. American psychiatric Association, Diagnostic and Statistical Manual of Mental Disorders Fourth Edition, Text Revision (Washington, DC: American psychiatric Association, 2000),P 704
[14]. N. B Levisohn and C. Turner, “An Investigation of the There. -25 Accidents” Computer (IEEE, July 1993) 18-41 Roland Schinzinger. “Ethics on the Feedback Loop,” Control Engineering practice 6 (1958), P 45.
[15]. Ludwig Wittgenstein, Philosophical 3d ed, Tran. G.E.M Ansombe (New York Macmillan 1958), P 32
[16]. Hebert Hoover. “The profession of Engineering” in the Memoirs of Herbert Hoover, vol. 1 (New York: Macmillan, 1961), PP 131- 34 Quotation in text used with permission of the Hoover Foundation.
[17]. Building Type Study 492, Engineering for Architecture: “Citicorp Center and St. peter’s Lutheran Church, “Architectural Record (Mid- August Special Issue 1976): 61-71 Charles Thornton, “ Conversation with William LeMessurie, “in C. H Thornton al. Exposed Structures Building Design (New York: Mc Grew- Hill, 1993).
[18]. Joe Morgenstern, “The Fifty- Nine Story Crises.”The New Yorker( May 29-1995): 45-53 Check also the online Ethics Center for Engineering and Science (http://www.onlineethics.org/)
[19]. H.L.A Hart Punishment ad Responsibility (Oxford England: Clarendon, 1973). Pp 211-30 Graham Haydon, On Being Responsible. The Philosophical Quarterly 28 (1978): 46-87 and R. Jay Wallace, Responsibility and the Moral Sentiments (Cambridge, MA Harvard University Press 1996)
[20]. Herbert A. Simon, “What we know. About Learning” Journal of Engineering Education (American Society of Engineering Educing) 87 (October 1998): 343-48.
[21]. Edwin T. Layton Jr. The Revolt of the Engineers: Social Responsibility and the American Engineering profession (Baltimore Johns Hopkins University press 1986). Pp 1.5
[22]. Michael Bayle’s, Professional Ethics. 2d ed. (Belmont, CA: C Callahan (ed.) Ethical Issues in professional Life (New York: Oxford University press, 1998): and John Rowan and Samuel Zinnias Jr.(eds.) Ethics for the professional (Belmont, CA Wadswoth/ Thomson)
[23]. Peter C. Fusaro and Ross M. Miller. What went wrong at Enron? (New York Wiley& sons, 2002) Loren Fox. Enron: The Rise and fall (New York John Wiley& sons, 2003).
[24]. Mary scot and Howard Rothman, companies with a conscience( New York Carol Publishing group, 1992)pp 103-17
[25]. R. Edward Freeman “The Politics of Stakeholder Theory. Business Quarterly 4 (1994) 409-21 see. Also James J. Bummer Corporate Responsibility and Legitimacy (New York Green wood press, 1991) pp 144- 64 Ronald M. Green. The Ethical Manger (New York Macmillan 1994) pp 25-42
[26]. Milton Friedman. “the social Responsibility of Business is to Increase Its Profits” the New York Times Magazine September 13- 1970
[27]. Milton Friedman capitalism and freedom (Chicago: University of Chicago press, 1963) p. 133 see Thomas Carson, Friedman’s Theory of Corporate Social Responsibility. Business and professional Ethics journal 12 (Spring 1993): 3- 32 for critiques of Friedman’s view see peter Ducker. An introductory view of Management (New York Hipper & Row, 1974) P. 61 Robert C. Solomon, Ethics and Excellence. Cooperation and integrity in Business (New York Oxford University Press 1992)p 120.
[28]. Joseph A. Raelin. The Clash of cultures. Managing professional (Boston: Harvard Business School press. 1991.
[29]. Howard Gardner, Mealy Csikszentmihalyi, and William Damon Good work, when excellence. And Ethics Meet (New York Basic Book 2001).
[30]. Peter A. French, Corporate Ethics (New York: Harcourt Brace, 1995).
[31]. Michael D. Smith, the Virtuous Organizations, “Journal of Medicine and Philosophy 7. No, 1 (February 1982). 35-42
[32]. Richard C. Vaughn Legal Aspects of Engineering. 3d ed. (Dubuque, IA Kendall/ hunt, 1977)pp 41-47.
[33]. Michael Davis Profession, code and Ethics (Burlington VT Ashagte publishing company 2002).
[34]. Lawrence Starch “Attracting Young Engineers to the professional society. “professional Engineer 41 (May 1971)
[35]. Robert L. White law. The Professional Status of the American Engineer. A Bill of Rights.” Professional Engineer 45 (August 1975) 37-38.
[36]. Harry C. Sumrall. The civic Responsibility of the professional Engineer. The American Engineer. (May 1963) 39.
[37]. James J. Bummer Corporate Responsibility and Legitimacy (New York: Green wood press 1991)pp 144- 64: Ronald M. Green, the Ethical Manger (New York: Macmillan, 1994), 25-42.
[38]. Peter C. Fusaro and Ross M. Miller, What Went wrong at Enron? P51.
[39]. Roland schinzinger, “Ethics on the Feedback Loop. Control Engineering practice 6 (1998) 239-45 see also Harries, Pritchard and Rabins, Engineering Ethics and Carolyn with beck Ethics in Engineering practice and Research for use of “Feedback” in resolving ethical problems

Dr. Vineet Kumar Purohit “Professional Ethics in Engineering” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp. 88-91 January 2019 URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/88-91.pdf

Download PDF

pdf

Modeling and Fabrication of Advanced Sorghum Peeler Machine

Chandramouli T V, Disha M Nayak – January 2019 Page No.: 92-97

Sorghum belongs to the grass family, Gramineae. It is essential that producers know the crop they are cultivating in order to develop the most effective production practices. Sorghum is mainly cultivated in drier areas, especially on shallow and heavy clay soils [3]. The production of sorghum in Karnataka varies from 100 00 tones to 180 00 tons per annum. The Karnataka provinces are the largest contributors to the area planted to sorghum and sorghum production. Here in this study we are modeled and fabricated the advanced SORGHUM peeler machine which is very farmers friendly in operation and economical for the pocket. Here we first modeled the machine using CATIA V5 a 3D modeling software, then started fabricating the machine after taking feedbacks, suggestions from the farmers, in order to produce a machine which helps the farmers to make his job easy, efficient and profitable.

Page(s): 92-97                                                                                                                   Date of Publication: 09 February 2019

 Chandramouli T V
P. G. Student, BMS College of Engineering, Basavanagudi, Bengaluru, Karnataka, India

 Disha M Nayak
Assistant Professor, BMS College of Engineering, Basavanagudi, Bengaluru, Karnataka, India

[1] , Y. S. and N. Krishnamoorthy. 1980. Processes for production of green pepper and buff coloured white pepper. Invention Intelligence. 15(3): 121-122.
[2] Singal, V. 1999. Pepper. In: Indian Agriculture. Indian Economic Data Research Centre, New Delhi. pp. 453-462.
[3] Anonymous. 1993. Preparation of white pepper. Spice India. 7(12): 15-16. Chandrasekar, V. and R. Viswanathan. 2002. Development and evaluation of low cost coffee pulper.
[4] Journal of Food science and Technology. 39(2): 139-143. E. H. Miller, “A note on reflector arrays (Periodical style—Accepted for publication),” IEEE Trans. Antennas Propagat., to be published.
[5] Karl T. Ulrich and Steven D. Eppinger(2004).Product design and development : [ISBN 0072471468]C. J. Kaufman, Rocky Mountain Research Lab., Boulder, CO, private communication, May 1995.
[6] Archer, B. (1974). Design awareness and planned creativity in industry. Toronto: Thorn Press Limited. [ISBN 0850720168].
[7] Hawker, Chris (2005). The Inventor’s Mind: 10 Steps to Making Money from Inventions. Columbus: Trident Design.
[8] J. Hauser and D. Clausing, “The House of Quality,” Harvard Business Review, May 1988, pp. 67-73
[9] Gopalam, A., T. J. Zachariah, K.N. Babu, A. K. Sadanandan, and A. Ramadasan. 1991. Chemical quality of black and white pepper. Spice India. 4(4): 8-10.
[10] Bayindirli L (1994) Mathematical analysis of lye peeling in tomatoes. Journal of Food Engineering 23(2): 225–231.
[11] Knoblich M, Anderson B, Latshaw D (2005) Analyses of tomato peel and seed byproducts and their use as a source of carotenoids. Journal of the Science of Food and Agriculture 85(7): 1166–1170
[12] Fellows P (2000) Food Processing Technology: Principles and Practice, 2nd edn. Boca Raton, FL: CRC Press.
[13] A text book on Product Design and Development Karl T Ulrich and Steven D Eppinger.
[14] Concept Screening Matrix for Design concept synthesis.

Chandramouli T V, Disha M Nayak “Modeling and Fabrication of Advanced Sorghum Peeler Machine” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.92-97 January 2019  URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/92-97.pdf

Download PDF

pdf

Early Childhood Development Education Implementation Challenges in Teso South, Busia County, Kenya

Judith Makudiuh, Khaemba Ongeti – January 2019 Page No.: 98-101

Following devolution of ECDE as a result of promulgation of Kenyan constitution 2010, scanty information exists regarding the status of ECDE in various counties in Kenya. This paper therefore examines the ECDE implementation challenges in Teso Sub County. The study used a cross sectional descriptive research design utilizing both qualitative and quantitative techniques. The population of this study consisted of all ECDE centers in Teso South Sub County. The Sub County has 77 ECDE centers with two zones. A total of 64 teachers and 12 head teachers were selected to participate in the study. Multi-stage sampling techniques were adopted with stratified, simple random, census and purposive sampling being utilized. A questionnaire and an interview guide were the major tools used in collecting the information from teachers and head teachers respectively. Both qualitative and quantitative approaches were adopted utilizing thematic and descriptive analysis techniques respectively. Findings indicate that most ECDE centres have inadequate trained teachers; inadequate teaching and learning materials; inadequate school physical facilities and poor parental support. The study recommends that the county government of Busia to conduct a situational analysis on the status of ECDE centres not only in Teso South but in the entire county.

Page(s): 98-101                                                                                                                   Date of Publication: 09 February 2019

 Judith Makudiuh
Department of Curriculum, Instruction and Educational Media, Moi University, Kenya

 Khaemba Ongeti
Department of Curriculum, Instruction and Educational Media, Moi University, Kenya

[1]. Gay, I. (2002). Educational research: Competences for analysis and application (4th ed.). New York: Macmilan.
[2]. Government of Kenya (GoK) (2012).Sessional Paper No.14 of 2012 on realigning education and training to the Constitution of Kenya 2010 and Vision 2030 and beyond: Ministry of Education, Science and Technology; Nairobi. Kenya.
[3]. The constitution of Kenya (2010). National Council for Law Reporting, Nairobi
[4]. Hirst, Jewis, Sojo and Cavanagh (2011) Transition to Primary: A Review of the Literature. Accessed from: www.Kidsmatter.Edu.Au.
[5]. Were, PO. (2014). Effects of Teaching and Learning Resources on Pre School Learners Transition to Class One: A Case Study of Rachuonyo South Sub County Journal of Education and Practice; 5(34): 154-160.

Judith Makudiuh, Khaemba Ongeti “Early Childhood Development Education Implementation Challenges in Teso South, Busia County, Kenya” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.98-101 January 2019  URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/98-101.pdf

Download PDF

pdf

Assessment of Polycyclic Aromatic Hydrocarbons Levels in Soil around Automobile Repair Workshops within Eket Metropolis, Akwa Ibom State, Nigeria
Akanimo Ekanem, Edidiong Ikpe and Ifiok Ekwere – January 2019 – Page No.: 102-107

The paper is aimed at investigating the levels of PAHs in the soil collected at various depths (0-10cm, 10-20cm and 20-30cm) from vicinity of automobile repair workshops within Eket metropolis, Nigeria. The soils were prepared using standard procedure in the laboratory and analysed for 16 US EPA priority PAHs using Gas Chromatography-Mass Spectrometer (GC-MS). The concentration of total PAHs in the contaminated soil ranged from 0.83 to 12.98mg/kg and did not follow regular pattern with depth. These levels according to European Commission is said to be moderately to heavily contaminated. The soils were relatively enriched with Low Molecular Weight PAHs. The soil in these sampling sites had low carcinogenic burden, hence moderate adverse health effect. Diagnostic ratio used in determining PAHs source reveals that they PAHs originated from mixed sources (Phytogenic, Petrogenic and Pyrogenic sources). It can be concluded that automobile repair activities contributed to the soil contamination with PAHs, hence it should be properly sited.

Page(s): 102-107                                                                                                                   Date of Publication: 09 February 2019

 Akanimo Ekanem
Department of Chemistry, Akwa Ibom State University, Akwa Ibom State, Nigeria

 Edidiong Ikpe
Department of Chemistry, Akwa Ibom State University, Akwa Ibom State, Nigeria

 Ifiok Ekwere
Department of Chemistry, Akwa Ibom State University, Akwa Ibom State, Nigeria

[1]. V. J. Odjegba, and A.O. Sadiq, Effects of spent engine oil on the growth parameters, chlorophyll and protein levels of Amaranthus hybridus L. The Environmentalist, 2002, 22: 23-28.
[2]. M. A. Nwachukwu, H. Feng, J. Alinnor, and Nwachukwu M. A, comparative analysis of trace metal pollution parity between sandy and shaly soils; evidence from two mechanic villages in the Imo River basin. Environmental Earth Sciences, 2012, 65(3): 765-774.
[3]. A. R. Ipeaiyeda, and M.Dawodu, Heavy metals contamination of topsoil and dispersion in the vicinities of reclaimed auto-repair workshops in Iwo, Nigeria. Bulletin of the Chemical Soceity of Ethiopia, 2008, 22(3):339-348.
[4]. C.M. Iwegbue, Metal fractionation in soil profiles at automobile Mechanic Waste Dumps around Port Harcourt. Waste Management Research, 2007, 25(6): 585-593.
[5]. N. J. Peterson. Health risk assessment for naphthalene and benzo(a)pyrene. Arizona Department of Health Services, Division of Disease Prevention Office of Risk Assessment and Investigation. Department of Environmental Quality, Task Assignment no. 10, 1989,ADEQ.
[6]. J. Sabate, M. Vinas and A. M. Solanus. Bioavailability Assessment and Environmental Fate of Polycyclic Aromatic Hydrocarbons in Biostimulated Creosole-contaminated soil.Chemosphere, 2006, 63:1648-1659.
[7]. S. S. Franco, C. Adelaide, A. C. Nardocci and W. M. S. Günther, PAH biomarkers for human health risk assessment: a review of the state-of-the-art. Saúde Pública, Rio de Janeiro, 2008, 24(4):569-580.
[8]. T. N. Nganje, P. A. Neji, K. A. Ibe, C. I. Adamu and A. E. Edet, Fate, Distribution and Sources of Polycyclic Aromatic Hydrocarbons (PAHs) in contaminated soils in parts of Calabar metropolis, South Eastern Nigeria.Journal of Applied Science Environmental Management, 2014, 18(2):309-316.
[9]. L. H. Keith and W. A. Telliard, Priority pollutants:A perspective view. Environmental Science and Technology, 1979, 13: 416-423.
[10]. M. Zander, Polycyclic aromatic and heteroaromatic hydrocarbons. In O. Hutzinger (Ed), The handbook of environmental chemistry (anthropogenic compounds), 1980, 3:109-131.
[11]. M. Howsam and K. C. Jones, Sources of PAHs in the environment. In: A. H. Neilson (Ed.), The handbook of environmental chemistry (anthropogenic compounds), 1998, 3:137-174.
[12]. E. R. Christener and S. Arora, Source apportionment of PAHs in sediments using factor analysis by time records. Application to Lake Michigan, U.S.A. Water Research, 2007, 41:168-176.
[13]. B. O. Ekpo, O. E. Oyo-Ita, D.H. Oros and B. R. T. Simoneit, Distribution and sources of polycyclic aromatic hydrocarbons in surface sediments from Cross River estuary, SE Niger Delta, Nigeria. Environmental Monitoring and Assessment, 2011, 184, 1037-1047. http://dx.doi.org/10.1007/s10661-011-2019-5
[14]. T. N. Nganje, A. E. Edet and S. J. Ekwere, Distribution of polycyclic aromatic hydrocarbon in surface soils from petroleum handling facilities in Calabar Metropolis, Southeastern Nigeria. Environmental Monitoring and Assessment, 2007a, 130, 27 – 34.
[15]. T. N. Nganje, A. E. Edet and S. J. Ekwere, Concentration of heavy metals and hydrocarbons in groundwater near petrol stations and mechanic workshops in Calabar metropolis, Southeastern Nigeria. Environmental Geoscience, 2007b, 14(1):15-29
[16]. T. N. Nganje, P. A. Neji, K. A. Ibe, C. I. Adamu and A. E. Edet, Fate, Distribution and Sources of Polycyclic Aromatic Hydrocarbons (PAHs) in contaminated soils in parts of Calabar metropolis, South Eastern Nigeria.Journal of Applied Science Environmental Management, 2014, 18(2):309-316.
[17]. T. N. Nganje, A. E. Edet, U. J. Ibok, E. J. Ukpabio, K. A. Ibe and P. Neji, Polycyclic aromatic hydrocarbons in surface water and soil in the vicinity of fuel-oil spillage from a tank farm distribution facility, EsukUtan, Calabar Municipality, Nigeria, Environmental Earth Science, 2012, 67:81-90.
[18]. K. A. Ibe, V. N. Osabor, T. N. Nganje, P.A. Neji and C. I. Adamu, Polycyclic aromatic hydrocarbon levels in rural/ semi- urban areas of Cross River State. International Journal of Experimental and Theoretical Chemistry, 2013, 2(1): 10-14.
[19]. K. A. Ibe, T. N. Nganje and A. E. Edet, Polycylic aromatic hydrocarbons in soils within Calabar Metropolis. Journal of Chemical Society of Nigeria, 2012, 37(1):1-6.
[20]. USEPA, United State Environmental Protection Agency. Method 3540C, test methods for evaluating solid waste, physically chemical methods. SW-846 annual. US Environ. Protect. Agency. Revision 3, 1996a.
[21]. USEPA, United State Environmental Protection Agency. Test methods for evaluating solid waste, physical chemical methods, methods 8270-C for semivolatile organic compounds by Gas Chromatography Mass Spectrometry GC-MS., SW-846 (3rd ed.). Washington, DC: U.S. Government Printing Office. 1996b
[22]. B. Maliszewska-Kordybach, The relation between the properties of PAH and the rate of their disappearance from different soils. Toxicological and Environmental Chemistry, 1998, 66, 45.
[23]. P. Nagy, J. Fekete, V. K. Sharma,. Polycyclic aromatic hydrocarbons (PAHs) in surface waters of Rackevei-Soroksari Danube Branch, Hungary. Journal of Environmental Science and Health, part A: Toxic/Hazardous Substances and Environmental Engineering, 2007, 42(3):231-240.
[24]. N. R. Bishnoi, U. Mehta, U. Sain and G. G. Pandit, Quantification of polycyclic aromatic hydrocarbons in tea and coffee samples of Mumbai city (India) by high performance liquid chromatography. Environmental Monitoring and Assessment, 2005, 107:399–406
[25]. L. L. Ma, S. G. Chu, X. T. Wang, H. X. Cheng, X. F. Liu and X. B. Xu, Polycyclic aromatic hydrocarbons in the surface soils from outskirts of Beijing, China. Chemosphere, 2005, 58:1355–1363.
[26]. Chung, N. J., Cho, J. Y., Park, S. W., Hwang, S. A. & Park, T. L. (2008). Polycyclic aromatic hydrocarbons in soils and crops after irrigation of wastewater discharged from domestic sewage treatment plants. Bulletin Environmental Contamination and Toxicology, 81, 124–127
[27]. C. P. Nathanial, C. Mc Affrey, M. Ashmore, Y. Cheng, A. Gilett, P. Hooker, Generic assessment criteria for human health risk assessment. Nottingham:Land Quality. 2007.
[28]. Q. Shen, K. Y. Wang, W. Zhang, S. C. Zhang, X. J. Wang, Characterization and sources of PAHs in an urban River system in Beijing, China. Environmental Geochemical Health, 2009, 31:453-462
[29]. F. S. Matt, J. E. Steven, Paul, J. L, Source apportionment and Source/sink relationships of PAHs in the coastal atmosphere of Chicago and Lake Michigan. Atmospheric Environment, 1999, 33:5071-5079.
[30]. G. C. Fang, C. N. Chang, Y. S. Wu, F.P.P. Cheng, I. L. Yang and M. H. Chen, Characterization, identification of ambient air and road dust polycyclic aromatic hydrocarbons in central Taiwan, Taichung. The Science of the Total Environment, 2004, 327:135–146.
[31]. G. De Luca, A. Furrel, R. Leardi, G. Micera, A. Panzanelli, P. C. Piu et al., Polycyclic aromatic hydrocarbons assessment in the sediments of the Porto Torres Harbour (Northern Sardinia, Italy). Marine Chemistry, 2004, 86:15-32
[32]. H. Budzinki, I. Jones, J. Bellocq, C. Pierand and P. Garrigues, Evaluation of sediment contamination by polycyclic aromatic hydrocarbons in the Gironde estuary. Marine chemistry, 1997, 58:85-97
[33]. D. Wang, M. Yang, H. Jia, L. Zhou and Y. Li, Polycyclic aromatic hydrocarbons in urban street dust and surface soil: Comparisons of concentration, profile, and source. Archives of Environmental Contamination and Toxicology, 2009, 56:173–180.
[34]. I. C. T. Nisbet and P. K. LaGoy, Toxic equivalency factors (TEFs) for polycyclic aromatic hydrocarbons (PAHs). Regulatory Toxicology and Pharmacology, 199216,290-300.

Akanimo Ekanem, Edidiong Ikpe and Ifiok Ekwere “Assessment of Polycyclic Aromatic Hydrocarbons Levels in Soil around Automobile Repair Workshops within Eket Metropolis, Akwa Ibom State, Nigeria” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.102-107 January 2019 URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/102-107.pdf

Download PDF

pdf

Detection of Diabetic Retinopathy in Fundus Images using Extreme Learning Machines

Lisa Maria Macedo, Prof. Amita Dessai – January 2019 Page No.: 108-112

Diabetic Retinopathy (DR) is the term used to describe the retinal damage due to diabetes.
Initially, diabetic retinopathy may cause none to mild symptoms but sight loss at an advanced stage.
Hence detecting lesions automatically in retinal images can assist in diagnosis and screening of DR at an early stage.
The detection of the different lesions in fundus images is therefore of interest. This project proposes thepre-processing of the image using a Median Filter and Contrast Limited Adaptive Histogram Equalization(CLAHE), optic disc detection using Hough Transform, feature extraction using Gray-Level Co-Occurrence Matrix (GLCM)and Extreme Learning Machines (ELM) for classification.

Page(s): 108-112                                                                                                                   Date of Publication: 11 February 2019

 Lisa Maria Macedo
Dept. of Electronics and Telecommunication Engineering, Electronics Communication and Instrumentation
Goa College of Engineering, Farmagudi, Goa, India

 Prof. Amita Dessai
Dept. of Electronics and Telecommunication Engineering, Electronics Communication and Instrumentation
Goa College of Engineering, Farmagudi, Goa, India

[1]. Elbalaoui, M. Fakir, and A. Merbouha. Segmentation and Detection of Diabetic Retinopathy Exudates, International Journal of Computer Applications(0975 8887) Vol. 91, No. 16, April 2014
[2]. Amin Dehghani, H. A. Moghaddam and Mohammad-Shahram Moin. Optic disc localization in retinal images using histogram matching, EURASIP Journal on Image and Video Processing 2012, 2012:19
[3]. Amit Ashok Kamthane. The Lesion Exudate Detection In Retinal Images, International Journal of Advanced Computational Engineering and Networking Vol.3, Issue-9, Sept.-2015
[4]. Arturo Aquino, Manuel Emilio Gegúndez-Arias, and Diego Marín. Detecting the Optic Disc Boundary in Digital Fundus Images Using Morphological, Edge Detection, and Feature Extraction Techniques, IEEE TRANSACTIONS ON MEDICAL IMAGING, VOL. 29, NO. 11, NOVEMBER 2010
[5]. Adam Hoover and Michael Goldbaum. Locating the Optic Nerve in a Retinal Image Using the Fuzzy Convergence of the Blood Vessels, IEEE TRANSACTIONS ON MEDICAL IMAGING, VOL. 22, NO. 8, AUGUST 2003
[6]. Salman Sayed, Dr. V. Inamdar, S. Kapre. Detection of Diabetic Retinopathy using Image Processing and Machine Learning, IJIRSET, Vol. 6, Issue 1, January 2017
[7]. Shijian Lu. Accurate and Efficient Optic Disc Detection and Segmentation by a Circular Transformation, IEEE TRANSACTIONS ON MEDICAL IMAGING, VOL. 30, NO. 12, DECEMBER 2011
[8]. Thomas Walter, Jean-Claude Klein, P. Massin, and Ali Erginay. A Contribution of Image Processing to the Diagnosis of Diabetic Retinopathy—Detection of Exudates in Color Fundus Images of the Human Retina, IEEE TRANSACTIONS ON MEDICAL IMAGING, VOL. 21, NO. 10, OCTOBER 2002
[9]. Dilip Singh Sisodia, Shruti Nair and Pooja Khobragade. Diabetic Retinal Fundus Images: Preprocessing and Feature Extraction For Early Detection of Diabetic Retinopathy, Biomedical & Pharmacology Journal Vol. 10(2), 615-626 (2017)

[10]. C. I. Sánchez, R. Hornero, M. I. López, J. Poza. Retinal Image Analysis to Detect and Quantify Lesions Associated with Diabetic Retinopathy, 26th Annual International Conference of the IEEE EMBS, San Francisco, USA September 1-5, 2004
[11]. V.Sathananthavathi, G.Indumathi, R.Rajalakshmi. Abnormalities Detection in Retinal Fundus Images, International Conference on Inventive Communication and Computational Technologies (ICICCT 2017)
[12]. Akshatha Rao M., Rekha Bhandarkar, T.C. Manjunath. Automated Detection of Diabetic Retinopathy through Image Feature Extraction, 2014 International Conference on Advances in Electronics, Computers and Communication (ICAECC) 978-1-4799-5496-4/1/$32.00 2014 IEEE
[13]. Kevin Noronha, Jagadish Nayak, S.N. Bhat. Enhancement of retinal fundus Image to highlight the features for detection of abnormal eyes. 1-4244-0549-1/06/20.00 2006 IEEE
[14]. V. Vijaya Kumari, N. Suriyanarayanan, C.Thanka Saranya. Feature Extraction for Early Detection of Diabetic Retinopathy, 2010 International Conference on Recent Trends in Information, Telecommunication and Computing, 978-0-7695-3975-1/10 25.00 2010 IEEE
[15]. Ali Shojaeipour, Md.JanNordin, NooshinHadav. Using Image Processing Methods for Diagnosis Diabetic Retinopathy, 2014 IEEE International Symposium on Robotics and Manufacturing Automation, 978-479-5765-1114/31.00 2014 IEEE

Lisa Maria Macedo, Prof. Amita Dessai “Detection of Diabetic Retinopathy in Fundus Images using Extreme Learning Machines” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.108-112 January 2019  URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/108-112.pdf

Download PDF

pdf

Chemical Composition of Methanolic Extract of Tulsi Leaves Ocimumsantum L.
Doli J. Jain, Suchita K. Rajurkar – January 2019 – Page No.: 113-114

Osmiumsantum L. is serve as medicine in Indian medicinal system from ancient time and today’s .This plant is potential source of bioactive molecules .In recent years, the indigenous system of medicine are getting more importance because of therapeutic value of these medicinal plants. In present study primary biochemical analysis followed by HRLCMS analysis leads to the identification of 15 Acids. In which Pteroyl-D-glutamic acid, Tuberonic acid, Baeomycesic Acid, various chemical compounds getting eluted from chemical profile of methanol extract of Tulsi leaf.

Page(s): 113-114                                                                                                                   Date of Publication: 11 February 2019

 Doli J. Jain
Department of Botany, Deogiri Collage, Aurangabad (M.S), India

 Suchita K. Rajurkar
Department of Botany, Deogiri Collage, Aurangabad (M.S), India

[1]. Sriniyas L. Naiketal (2015) Antimicrobial Activity and Phytochemical Analysis of Ocimumtenuiflorum Leaf Extract. International Journal of PharmTech Research CODEN (USA): IJPRIF, ISSN: 0974-4304 Vol.8, No.1, pp 88-95, 2015
[2]. N.Dev ,A.K. Das ,M.A. Hossain etal(2011)Chemical composition of different extracts of OcimumbasilicumL.leaves, journal of scientific Research.3 (1) 197-206 (2011)
[3]. Ashish Ranjan Singh, Vijay Kumar Bajaj, Pritam Singh SekhawatandKapil Singh (2013) Phytochemical estimation and Antimicrobial activity of Aqueous andMethanolic extract of Ocimum Sanctum L. Scholars Research LibraryJ. Nat. Prod. Plant Resour.2013, 3 (1):51-58
[4]. Prakash P.andNeelu Gupta (2005) Therapeutic uses ofOcimum Sanctum L. with a note on Eugenolaaand its Pharmacologicl actions :a short note. Indian J PhysiolPharmacol 2005; 49 (2) 125–131
[5]. RangitaTanwar ,Prof Amiya Pahare ,Dr.S.M.A.Naqvi (2015) of Ocimum Sanctum L.(Tulsi),Excellent source ofPhytochemicals. Indo American Journal of Pharmaceutical Research, 2015 ISSN NO: 2231-6876
[6]. Devendran G. and U. Balasubramanian (2011) Qualitative phytochemical screening and GC-MS analysis of Ocimum sanctum L. leaves Asian Journal of Plant Science and Research, 2011, 1 (4):44-48
[7]. Jyotsana Sharma, Naveen Khurana, Nehasharma , RakeshGarg. (2017) Phytochemical Evaluation and Antioxidant Screening studies of OcimumtenuflorumL. Seeds Asian Journal of Pharmaceutical and Clinical Research
[8]. AbhijitBalasahebShinde and Yogini RamkrishnaMulay (2015)Phytochemical Analysis and Antibacterial Properties of Some Selected Indian Medicinal Plants Int.J.Curr.Microbiol.App.Sci(2015) 4(3): 228-235.
[9]. Pranay Kumar Gupta, SiddarthPulapalli, Srikanth (2015) Tulsi: An elixir for human life Research and Reviews: Journal of Medicinal Chemistry British JournalfPharmaceutical Research3(2): 273-292, 2013
[10]. Baby Joseph and Vrundha M. Nair (2013)Ethanopharmacological and PhytochemicalAspects of Ocimum sanctum Linn- The Elixir of life British Journal of Pharmaceutical Research3(2): 273-292, 2013
[11]. P. Kalyankumar , M. Rupesh Kumar, K. Kavitha, Jagadeeshsingh and Rawoof Khan(2012) Pharmacological Actions of Ocimumsacntum– Review article (2012) IJAPBC – Vol. 1(3), Jul- Sep, 2012
[12]. Simanchal Panda, SwagatikaTripathy (2018) A review on pharmaceutical consideration ofOcimumsantumL International Journal Res. Ayurveda Pharma 9 (3),2018.
[13]. Kalyankumar , M. Rupesh Kumar, K. Kavitha, JagadeeshsinghandRawoof Khan (2012)Pharmacological Actions of Ocimumsacntum– ReviewArticle IJAPBC – Vol. 1(3), Jul- Sep, 2012 ISSN: 2277 – 4688
[14]. G. Devendran and U. Balasubramanian (2011)Qualitative phytochemical screening and GC-MS analysis of Ocimum sanctum L. leaves Asian Journal of Plant Science and Research, 2011, 1 (4):44-48

Doli J. Jain, Suchita K. Rajurkar “Chemical Composition of Methanolic Extract of Tulsi Leaves Ocimumsantum L.” International Journal of Research and Scientific Innovation (IJRSI) vol.6 issue 1, pp.113-114 January 2019 URL: https://www.rsisinternational.org/journals/ijrsi/digital-library/volume-6-issue-1/113-114.pdf

Download PDF

pdf